LG 306G Service-Handbuch - Seite 26

Blättern Sie online oder laden Sie pdf Service-Handbuch für Mobiltelefon LG 306G herunter. LG 306G 26 Seiten.

Seite drucken

national governments have advised that children be discouraged from using wireless phones at all. For example,

the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000.

They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their

recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific

evidence that any health hazard exists.

11. What about wireless phone interference with medical equipment?

Radio Frequency (RF) energy from wireless phones can interact with some electronic devices. For this reason,

the FDA helped develop a detailed test method to measure Electro Magnetic Interference (EMI) of implanted

cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard

sponsored by the Association for the Advancement of Medical Instrumentation (AAMI). The final draft, a joint

effort by the FDA, medical device manufacturers, and many other groups, was completed in late 2000. This

standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless

phone EMI. The FDA has tested hearing aids for interference from handheld wireless phones 15 and helped

develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This

standard specifies test methods and performance requirements for hearing aids and wireless phones so that no

interference occurs when a person uses a "compatible" phone and a "compatible" hearing aid at the same time.

This standard was approved by the IEEE in 2000. The FDA continues to monitor the use of wireless phones for

possible interactions with other medical devices. Should harmful interference be found to occur, the FDA will

conduct testing to assess the interference and work to resolve the problem.

12. Where can I find additional information?

For additional information, please refer to the following resources:

• Federal Communications Commission (FCC) RF Safety Program

(http://www.fcc.gov/oet/rfsafety)

• International Commission on Non-lonizing Radiation Protection

(http://www.icnirp.de)

• World Health Organization (WHO) International EMF Project

(http://www.who.int/emf)

• National Radiological Protection Board (UK)

(http://www.hpa.org.uk/radiation/)

Driving

Check the laws and regulations on the use of wireless phones in the areas where you drive and always obey them.

Also, if using your phone while driving, please observe the following:

•

Give full attention to driving -- driving safely is your first responsibility;

•

Use hands-free operation, if available;

•

Pull off the road and park before making or answering a call if driving conditions or the law require it.

Consumer Information on SAR (Specific Absorption Rate)

This model phone meets the Government's requirements for exposure to radio waves. Your wireless phone is a

radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure

to radiofrequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government.

These FCC exposure limits are derived from the recommendations of two expert organizations, the National

Counsel on Radiation Protection and Measurement (NCRP) and the Institute of Electrical and Electronics

Engineers (IEEE). In both cases, the recommendations were developed by scientific and engineering experts

drawn from industry, government, and academia after extensive reviews of the scientific literature related to the

biological effects of RF energy.

The exposure limit for wireless mobile phones employs a unit of measurement known as the Specific Absorption

Rate, or SAR. The SAR is a measure of the rate of absorption of RF energy by the human body expressed in units

of watts per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit of 1.6 watts per

kilogram (1.6 W/ kg). The FCC exposure limit incorporates a 16 substantial margin of safety to give additional

protection to the public and to account for any variations in measurements. Tests for SAR are conducted using

standard operating positions specified by the FCC with the phone transmitting at its highest certified power level

in all tested frequency bands.

Although SAR is determined at the highest certified power level, the actual SAR level of the phone while operating

can be well below the maximum value. Because the phone is designed to operate at multiple power levels to

use only the power required to reach the network, in general, the closer you are to a wireless base station

antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested

and certified to the FCC that it does not exceed the limit established by the government adopted requirement

for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as

required by the FCC for each model.

The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as

in compliance with the FCC RF emission guidelines. The highest SAR value for this model phone when tested

for use at the ear is 1.12 W/kg and when worn on the body, as described in this user's manual, is 0.94 W/kg.

While there may be differences between SAR levels of various phones and at various positions, they all meet the

government requirement for safe exposure. SAR information on this model phone is on file with the FCC and can

be found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid/ after searching on FCC ID ZNF306G.

To find information that pertains to a particular model phone, this site uses the phone FCC ID number which

is usually printed somewhere on the case of the phone. Sometimes it may be necessary to remove the battery

pack to find the number. Once you have the FCC ID number for a particular phone, follow the instructions on the

website and it should provide values for typical or maximum SAR for a particular phone. Additional information

on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association

(CTIA) website at http://www.ctia.org/ *In the United States and Canada, the SAR limit for mobile phones used

by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial

margin of safety to give additional protection for the public and to account for any variations in measurements.

Part 15.105 statement

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient

or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the

equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or

an experienced radio/ TV technician for help. *Service not available everywhere. *Information subject to change.

Part 15.21 statement

Changes or modifications that are not expressly approved by the manufacturer could void the user's authority

to operate the equipment.