AEG OKO FAVORIT 40660 i User Information - Seite 26
Blättern Sie online oder laden Sie pdf User Information für Geschirrspüler AEG OKO FAVORIT 40660 i herunter. AEG OKO FAVORIT 40660 i 44 Seiten. Aeg dishwasher
Auch für AEG OKO FAVORIT 40660 i: Gebrauchsanweisung (40 seiten), Gebrauchsanweisung (44 seiten), Gebrauchsanweisung (44 seiten), Gebrauchsanweisung (48 seiten)
What to do if...
Remedying small malfunctions
If while the appliance is operating indicators on the control panel flash
or are lit up as described in the following table, please consult this to
find out how to remedy the fault.
After remedying the fault that is flashing in the first or second
rhythm in the programme progress display, press the button for the
dishwashing cycle that had already started. The cycle will continue.
In the case of other fault messages:
– Cancel the dishwashing cycle.
– Switch the appliance off and on again.
– Select dishwashing cycle.
If the fault is displayed again, please contact the Service Force Centre
and inform them of the fault message.
Malfunction
The programme indicator for
the selected dishwashing cy-
cle is flashing,
the indicator for the end of
the dishwashing cycle is
flashing in sequence 1 short
light signal with approx. 3
second pause in-between:
(Problems with water inlet)
The programme indicator for
the selected dishwashing cy-
cle is flashing,
the indicator for the end of
the dishwashing cycle is
flashing in sequence 2 short
light signals one after anoth-
er.
26
Possible cause
The tap is blocked or furred
with lime-scale.
The tap is turned off.
The filter (where present) in
the threaded hose fitting on
the tap is blocked.
Filters in the base of the
washing compartment are
blocked.
Water inlet hose has not
been correctly positioned.
The sink spigot connection
is blocked.
Water drain hose has not
been correctly positioned.
Remedy
Clean tap.
Turn the tap on.
Clean the filter in the
threaded hose fitting.
Cancel the dishwashing
cycle (see chapter:
Starting a dishwashing
cycle),
clean filters (see chap-
ter: Cleaning the filters),
then start the dishwash-
ing cycle again.
Check hose installation.
Clean the sink spigot
outlet.
Check hose installation.