AEG VA6011LT Gebrauchsanweisung - Seite 30

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Geschirrspüler AEG VA6011LT herunter. AEG VA6011LT 48 Seiten.

Operating Instructions

Changing the dishwashing cycle after the start delay has been set:

As long as the dishwashing cycle has not started, you are still able to

change the start delay set by pressing a cycle button.

1. Press the button for the new dishwashing cycle and hold it down.

First, the indicator for the dishwashing cycle that has just been selected

will flash.

After several seconds only the indicator for the new dishwashing cycle

will be flashing.

2. Release the cycle button.

3. Close the door.

The dishwashing cycle will start automatically following a countdown

of the hours set.

Load Sensing – AUTOMATIC

If a wash programme is started even though there are only a few dishes

in the upper and/or lower rack, an intelligent electronic system adjusts

the amount of water and the duration of the wash programme to the

number of dishes. By this means it is possible to wash only a few dishes

quickly and economically. At half load (6 place settings), up to 2 litres

of water and 0.2 kWh of electricity are saved.