Brother MFC-J432W Schnellstart-Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Alles in einem Drucker Brother MFC-J432W herunter. Brother MFC-J432W 37 Seiten.
Auch für Brother MFC-J432W: Benutzerhandbuch (40 seiten)
Seite drucken
e
Gently put the paper into the paper tray print
side down and top edge first. Check that the
paper is flat in the tray.
IMPORTANT
Be careful that you do not push the paper in
too far; it may lift at the back of the tray and
cause paper feed problems.
f
Gently adjust the paper side guides to the
paper with both hands. Make sure that the
paper side guides touch the edges of the
paper.
g
Close the output paper tray cover.
h
Slowly push the paper tray completely into the
machine.
i
While holding the paper tray in place, pull out
the paper support a until it clicks, and then
unfold the paper support flap b.
• The machine must be fitted with an earthed
• Since the machine is grounded through the
DO NOT connect the USB cable yet (if you are
using a USB cable).
a
b
2
1
3
Connect the power cord
and telephone line
WARNING
plug.
power outlet, you can protect yourself from
potentially hazardous electrical conditions on
the telephone network by keeping the power
cord connected to your machine when you
connect it to a telephone line. Similarly, you
can protect yourself when you want to move
your machine by disconnecting the telephone
line first and then the power cord.
IMPORTANT
Connect the power cord.
(Example for Australia)
Connect the telephone line cord. Connect one
end of the telephone line cord to the socket on
the machine marked LINE and the other end to
a telephone wall socket.
3