Brother MFC-J805DW Handbuch zur Schnelleinrichtung
Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Alles in einem Drucker Brother MFC-J805DW herunter. Brother MFC-J805DW 2 Seiten. Brief explanations for routine operations
Auch für Brother MFC-J805DW: Referenzhandbuch (28 seiten)
MFC-J805DW / MFC-J815DW
Quick Setup Guide
Read the Product Safety Guide first, then read this Quick Setup Guide
for the correct installation procedure.
Unpack the machine and check the components
1
The components included in the box may differ depending on your country.
Remove the protective tape or film covering the machine.
Starter Ink Cartridges
• Black
• Yellow
• Cyan
• Magenta
Watch our FAQ Videos for help
with setting up your Brother
machine.
support.brother.com/videos
2
Load paper in the paper tray
Connect the
3
power cord
NOTE
You can adjust the control panel angle
to read the LCD more easily.
5
Set the date and time
Follow the prompts displayed on the LCD to set the date and time.
Select your language
8
(if needed)
1.
Press Settings.
2.
Press a or b to select the following:
a.
Select [Initial Setup], and then press OK.
b.
Select [Local Language], and then press OK.
c.
Select your language, and then press OK.
3.
Press Stop/Exit.
Quick Setup Guide
Product Safety Guide
1
Open the output paper tray
cover a.
Fan the paper well and load it in the tray.
4
Install the starter ink cartridges
Open the ink cartridge cover.
6
Machine settings
When the machine has finished the initial cleaning process,
follow the steps on the LCD to configure the machine settings.
• Set Firmware Update defaults
• Check print quality
• Print the installation sheet
Select the correct
9
Receive Mode
If you are not using your machine as a fax, go to
1.
Press Settings.
2.
Press a or b to select the following:
a.
Select [Fax], and then press OK.
b.
Select [Setup Receive], and then press OK.
c.
Select [Receive Mode], and then press OK.
d.
Select your Receive Mode, and then press OK.
3.
Press Stop/Exit.
The latest manuals are available at the Brother Solutions Center:
support.brother.com/manuals
Brother Installation Disc
Telephone Line Cord
Close the output paper tray cover, and
Adjust the paper guides.
then slowly push the tray completely
into the machine.
Follow the steps on the LCD to unpack and install the ink cartridges. Close the ink cartridge
cover. The machine will prepare the ink tube system for printing.
NOTE
The first time you install the ink cartridges, the machine will use extra ink to fill the ink delivery tubes.
This is a one-time process that enables high-quality printing.
7
.
11
NOTE
Manuals in Spanish for this model are available at support.brother.com.
Manuales en Español para este modelo están disponibles en support.brother.com.
• Most of the illustrations in this Quick Setup Guide show the MFC-J815DW.
• Save all packing materials and the box in case you must ship your machine.
• You must purchase the correct interface cable for the interface you want to
use. A USB cable is included in some countries.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than 6 feet
(2 meters) long.
NOTE
Pull out the paper support a, and unfold
the paper support flap b so that the
printed pages do not fall.
Connect the telephone line cord
If you are not using your machine as a fax, go to
For more information on using the fax feature, see the Online User's Guide.
10
Set your Station ID
If you are not using your machine as a fax, go to
Store your name and fax number so the machine prints it on all
outgoing fax pages.
For more information, see Enter Text on Your Brother Machine
in the Online User's Guide.
1.
Press Settings.
2.
Press a or b to select the following:
a.
Select [Initial Setup], and then press OK.
b.
Select [Station ID], and then press OK.
c.
Select [Fax], and then press OK.
3.
Enter your fax number (up to 20 digits), and then press OK.
4.
Press a or b to select [Name], and then press OK.
5.
Enter your name (up to 20 characters), and then press OK.
6.
Press Stop/Exit.
D01D7S001-01
USA/CAN
Version B
2
1
8
.
11
.