Brother MFC-T910DW Referenzhandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Referenzhandbuch für Alles in einem Drucker Brother MFC-T910DW herunter. Brother MFC-T910DW 29 Seiten. Brief explanations for routine operations
Auch für Brother MFC-T910DW: Handbuch zur Produktsicherheit (24 seiten), Handbuch zur Schnelleinrichtung (2 seiten), Referenzhandbuch (30 seiten)

Brother MFC-T910DW Referenzhandbuch
7
Fax

Before Faxing

Telephone Line Interference/
VoIP
If you are having problems sending or
receiving a fax due to possible interference on
the telephone line or if you are using a VoIP
system, we recommend changing the modem
speed to minimize errors in fax operations.
1
Press Ajustes (Settings).
2
Press a or b to select the following:
a. Select [Initial Setup].
Press OK.
b. Select [Compatibility].
Press OK.
c. Select [Normal] or [Basic(for
VoIP)]. Press OK.
• [Basic(for VoIP)] reduces
the modem speed to 9,600 bps
and turns off Error Correction
Mode (ECM). Unless interference
is a recurring problem on your
telephone line, you may prefer to
use it only when needed.
To improve compatibility with
most VoIP services, Brother
recommends changing the
compatibility setting to
[Basic(for VoIP)].
• [Normal] sets the modem
speed at 14,400 bps.
3
Press Detener/Salir (Stop/Exit).
• VoIP (Voice over IP) is a type of phone
system that uses an Internet
connection, rather than a traditional
phone line.

Send a Fax

NOTE
This feature is available only for black and
white faxes.
1
Load your document in the ADF or place
it on the scanner glass.
2
Press
(FAX).
The LCD displays:
Press Start
Enter Number
Fax Resolution
Standard
Contrast
3
Enter the fax number in one of the
following ways:
• Dial Pad (Enter the fax number
manually.)
Press all digits of the number using
the dial pad.
• Redial (Redial the last number you
dialed.)
Press Remarcar/Pausa (Redial/
Pause).
• Outgoing call (Select a number from
the Outgoing Call history.)
Press a or b to select the following:
a. Select [Call History].
Press OK.
b. Select [Outgoing Call].
Press OK.
c. Select the number you want, and
then press OK.
d. Press c to select [Apply].
Auto
13