Brother DCP-130C Benutzerhandbuch - Seite 39

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drucker Brother DCP-130C herunter. Brother DCP-130C 47 Seiten. Windows vista
Auch für Brother DCP-130C: Spezifikationsblatt (2 seiten), Handbuch zur Schnelleinrichtung (22 seiten), Handbuch zur Schnelleinrichtung (22 seiten), Setup-Handbuch (23 seiten), Handbuch zur Schnelleinrichtung (24 seiten), Handbuch zur Schnelleinrichtung (15 seiten)

Seite drucken

Checking the printing

alignment

Press Ink Management.

Press a or b to choose Test Print.

Press OK.

Press a or b to choose Alignment.

Press OK.

Press Mono Start or Colour Start.

The machine starts printing the

Alignment Check Sheet.

Is Alignment OK?

aYes bNo

Check the 600 dpi and 1200 dpi test

prints to see if number 5 most closely

matches number 0.

If the number 5 sample of both the

600 dpi and 1200 dpi are the best

matches, press a (Yes) to finish

Alignment Check, and go to step h.

If another test print number is a

better match for either 600 dpi or

1200 dpi, press b (No) to choose it.

For 600 dpi, press a or b to select the

number of the test print that most closely

matches the number 0 sample (1-8).

600dpi Adjust

Select Best #5

Press OK.

For 1200 dpi, press a or b to select the

number of the test print that most closely

matches the number 0 sample (1-8).

1200dpi Adjust

Select Best #5

Press OK.

Press Stop/Exit.

Troubleshooting and Routine Maintenance

Packing and shipping

the machine

CAUTION

It is important to allow the machine to 'park'

the print head after a print job. Listen

carefully to the machine before unplugging

it to make sure that all mechanical noise

has stopped. Not allowing the machine to

finish this parking process may lead to print

problems and possible damage to the print

head.

Open the ink cartridge cover.

Pull the lock release levers down and

take out all the ink cartridges. (See

Replacing the ink cartridges on page

32.)