AEG 75552G Betriebsanleitung - Seite 22

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Kochfeld AEG 75552G herunter. AEG 75552G 24 Seiten. Gas hob

Commissioning

When the hob has been fully installed it will be necessary to check

the minimum flame setting. To do this, follow the procedure below.

Turn the gas tap to the MAX position and ignite.

Set the gas tap to the MIN flame position then turn the control

knob from MIN to MAX several times. If the flame is unstable or

is extinguished follow the procedure below.

Procedure:

Re-ignite the burner and set to MIN.

Remove the control knob.

To adjust, use a thin bladed

screwdriver and turn the

adjustment screw (see diagram)

until the flame is steady and does

not extinguish, when the knob is

turned from MIN to MAX. Repeat

this procedure for all burners.

Pressure Testing

Remove left hand pan support and front left burner cap

and crown.

Fit manometer tube over the injector.

Turn on the burner gas supply and ignite another burner.

The pressure reading should be nominally 20mbar and

must be between 17 mbar and 25 mbar.

Turn off the burner supplies.

minimum adjustment screw