AEG 91900K Installations- und Betriebsanleitung - Seite 30

Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für Kochfeld AEG 91900K herunter. AEG 91900K 40 Seiten. Ceramic glass hob

AEG 91900K Installations- und Betriebsanleitung
.... after switching off the cooking zones, neither _ nor h for re-
sidual heat appears in the display?
Check whether
– the cooking zone was only used for a short period and is therefore
not hot enough.
If the cooking zone is hot, call thecustomer service.
.... a cooking zone cannot be switched off?
Check whether
– the sensor fields are partially covered by a damp cloth or liquid.
– the lock is activated.
.... a cooking zone cannot be switched on?
Check whether
– the lock is activated.
.... f is shown in the display?
Check whether the cooking zone has been overheated.
This indicator lights up to show overheating, electronic faults or for
safety reasons.
.... the display alternates between two heat settings, e.g.,
Ç and Å ?
Check whether the front left, rear right and front right cooking zones
are being used simultaneously and read the section "Power Manage-
ment".
If you call in customer service to resolve a problem caused by incorrect
operation of the appliance, the customer service engineer's visit will
not be free of charge, even during the warranty period.
66