Brother DCP-L2540DW Handbuch zur Produktsicherheit - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch zur Produktsicherheit für Drucker Brother DCP-L2540DW herunter. Brother DCP-L2540DW 26 Seiten. Brother mfps & printers product safety guide
Auch für Brother DCP-L2540DW: Handbuch zur Produktsicherheit (23 seiten), Benutzerhandbuch (13 seiten), Handbuch zur Schnelleinrichtung (2 seiten), Ersetzen der Trommeleinheit (12 seiten), Handbuch zur Schnelleinrichtung (2 seiten), Handbuch zur Produktsicherheit (25 seiten), Handbuch zur Schnelleinrichtung (2 seiten), Handbuch zur Schnelleinrichtung (2 seiten), Handbuch zur Schnelleinrichtung (2 seiten), Handbuch zur Schnelleinrichtung (2 seiten)

CAUTION

DO NOT place any objects around the product. Such objects block the access to the power

outlet in case of emergency. It is important that the product can be unplugged whenever

needed.

The product may generate odorous gas such as ozone if used for a large volume of printing or

used in a poorly ventilated room for long hours. In addition, the product emits some chemical

substances during the printing. Ensure adequate ventilation for the product to avoid discomfort

or injury.

Avoid placing your product in a busy area. If you must place it in a busy area, ensure that the

product is in a safe location where it cannot be accidentally knocked over, which could cause

injury to you or others and serious damage to the product. Also ensure that cords are secured

so as not to pose a tripping hazard.

DO NOT place heavy objects on the product.

DO NOT place this product on an unstable cart, stand, or table, particularly if children are

expected to be near the product. The product is heavy and may fall, causing injury to you or

others and serious damage to the product. For the products with scanning function, there is an

added risk of injury if the scanner glass should break.

Put your product on a flat, level, stable surface (such as a desk), that is free from vibration and

shocks. Put the product near a telephone wall jack (MFC only) and a standard grounded AC

power outlet.

IMPORTANT

• DO NOT place your product next to devices that contain magnets or generate magnetic fields.

Doing so may interfere with the operation of the product, causing print quality problems.

• DO NOT place your product next to sources of interference, such as speakers or the base units

of non-Brother cordless telephones. Doing so may interfere with the operation of the product's

electronic components.

• DO NOT connect your product to an AC power outlet controlled by wall switches or automatic

timers. DO NOT connect your product to the same circuit as a large appliance or other

equipment that requires a significant amount of electricity to operate (such as an air

conditioner, copier, or shredder). Operating this product in conjunction with other products that

require a significant amount of electricity to operate could disrupt the power supply or create

an overvoltage, tripping your circuit breaker or blowing your fuse. Disruption of the power

supply also may delete information from the product's memory, and repeated cycling of the

power supply can damage the product.