AEG BP8715001 Benutzerhandbuch - Seite 16
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kochfeld AEG BP8715001 herunter. AEG BP8715001 36 Seiten. Aeg bilt in electric oven
Seite drucken
16 www.aeg.com
5.
Set the oven function and, if neces-
sary, the oven temperature.
The appliance calculates an approxi-
mate end time. The end time is dif-
ferent for different quantities of
food, the set oven temperature (min-
imum 120 °C) and the operating
mode. The appliance calculates the
end time in approximately 30 mi-
nutes.
6.
Make sure that the core temperature
sensor stays in the meat and in the
core temperature sensor socket dur-
ing the cooking.
7.
If necessary, you can set a new core
temperature during the cooking. To
do this, touch
9.3 Telescopic runners
Keep the installation instructions
for the telescopic runners for fu-
ture use.
With telescopic runners you can put in
and remove the shelves more easily.
.
°C
°C
8.
When the meat is at the set core
temperature, an acoustic signal
sounds. The appliance deactivates
automatically.
Touch a sensor field to stop the sig-
nal.
9.
Remove the core temperature sen-
sor plug from the socket . Remove
the meat from the appliance.
WARNING!
The core temperature sensor is
hot. There is a risk of burns. Be
careful when you remove the tip
and plug of the core tempera-
ture sensor.
1.
Pull out the right and left hand tele-
scopic runners.
2.
Put the wire shelf on the telescopic
runners and carefully push them into
the appliance.
Make sure you push back the tele-
scopic runners fully in the appliance
before you close the oven door.
CAUTION!
Do not clean the telescopic run-
ners in the dishwasher. Do not lu-
bricate the telescopic runners.