Brother GTX pro Bulk Setup-Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Setup-Handbuch für Drucker Brother GTX pro Bulk herunter. Brother GTX pro Bulk 44 Seiten. Garment printer
Auch für Brother GTX pro Bulk: Schnellstart-Handbuch (20 seiten)
Seite drucken
SAFETY INSTRUCTIONS
WARNING
Printing
Keep your finger or any body part away from the
rotating fan. Otherwise it will be caught up, which
results in injuries.
Turn off the power when you approach the fan.
CAUTION
Environmental requirements
Use the printer in a place which is adequately
ventilated. A slight odor is generated when the
printed articles are being fixed by heat.
Installation
Setting up and moving of the printer should only be
carried out by a qualified technician.
The printer machine weighs 171 kg (376 lb) (main
body 128 kg (282 lb) + lower unit 43 kg (94 lb)).
Transporting and setting up of the printer should
be held in the proper way. Otherwise it may fall
down and cause injury.
When the printer falls down, disconnect the power
cord and contact the place of purchase or a
qualified technician. If you continue to use it, it may
result in fire or electric shocks or poor printing
quality.
iii
Do not place the printer on a shaky table or high
shelf or other unstable location. Otherwise it may
tip over or fall down and cause injury. For
information on the table that supports the printer,
contact the dealer.
Do not set up the printer in a place where it will be
affected by vibration. Otherwise the printing quality
may be degraded or the printer may fall down,
which causes injury or results in failure of the
printer.
Do not connect the power cord until installation is
complete. The printer may operate if the power is
turned on by mistake, which could result in injury.
Do not climb onto the printer or place heavy
objects on top of it. Otherwise it may become
unbalanced and tip over or fall down and cause
injury.
Be careful not to touch the claws of the mounting
portion on the upper side of the rear cover.
Otherwise you may be injured.
Printing
This printer should only be used by operators who
are appropriately trained in its safe operation.