AEG FM 7300G-AN Gebrauchsanweisung - Seite 11

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Kochfeld AEG FM 7300G-AN herunter. AEG FM 7300G-AN 16 Seiten. Electrolux hob
Auch für AEG FM 7300G-AN: Gebrauchsanweisung (32 seiten), Gebrauchsanweisung (33 seiten)

Seite drucken

However, to ensure accessi-

bility to the gas connection

there should generally be at

least 50 mm between the rear

of the hole for the gas hob

and the wall behind it.

1. Cut a hole in the worktop of the

given dimensions, see "Technical

data", "installation dimensions".

2. Place the hob upside down on a

soft underlay. Make sure not to

scratch the top surface.

3. Mount the fixings in the holes in

the sides of the base box. (See

fig.).

4. Insert the hob in the hole and

tighten the fixings to the worktop

with a screwdriver.

Mounted clamping fittings

Burners

Make quite sure the burner

ring and burner cap are posi-

tioned correctly over the

burner top.

For correct combustion the burner

rings and burner cap must be posi-

tioned correctly over the burner

body. If the burner rings and caps

are off-centre, the gas flame will

burn incorrectly and the burner caps

may be ruined in a short space of

time.

Control knobs

The control knobs have the follow-

ing settings:

Off:

Minimum:

Maximum:

1. Press down the control knob for

the desired burner

2. Hold the knob down while turning

it to the left to

3. Keep the knob pressed down for

4-5 seconds. Then release it and turn

the knob to the required setting.

Burner ring

Burner cap

Right

Burner body

Safety device

Wrong