AEG AWF8024M3SB Benutzerhandbuch - Seite 34

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Waschmaschine AEG AWF8024M3SB herunter. AEG AWF8024M3SB 40 Seiten.

www.aeg.com

Loosen or tighten the feet to adjust the

level. A correct adjustment of the

appliance level prevents vibration, noise

and the movement of the appliance when

in operation.

When the washing machine is levelled,

try to rock it from corner to corner. If it

does rock, adjust the legs again until it is

levelled and does not rock.

Never place cardboard, wood or similar

materials under the machine to

compensate for any unevenness in the

floor. Install the machine on a flat hard

floor. Make sure that air circulation

around the machine is not impeded by

carpets, rugs etc.

Check that the machine does not touch

the wall or cupboard units.

clockwise "DOWN"

counter clockwise "UP"

11.3 Water Inlet

Connect the water inlet hose to a tap

with 3/4" BSP thread.

Use the hose supplied with the washing

machine. DO NOT USE OLD HOSES.

check

The inlet hose must not be lengthened.

If it is too short and you do not wish to

move the tap, you will have to purchase

a new, longer hose specially designed

for this type of use.

Loosen the ring nut to angle the hose to

the left or right depending on the position

of your water tap. Do not place the inlet

hose downwards. After positioning the

inlet hose, be sure to tighten the ring nut

again to prevent leaks.

35°

45°

The end of the drain hose can be

positioned in three ways:

Hooked over the edge of a sink,

using the plastic hose guide supplied

with the machine.