Fujitsu LifeBook C-6591 Bios-Handbuch - Seite 13

Blättern Sie online oder laden Sie pdf Bios-Handbuch für Laptop Fujitsu LifeBook C-6591 herunter. Fujitsu LifeBook C-6591 40 Seiten. Bios setup utility
Auch für Fujitsu LifeBook C-6591: Software-Handbuch (39 seiten)

Fujitsu LifeBook C-6591 Bios-Handbuch
Serial/Parallel Port Configuration Submenu of the Advanced Menu
The Serial/Parallel Port Configuration submenu
provides the ability to set the I/O addresses and
interrupt levels for the serial, infrared, and parallel
ports of your notebook.
C A U T I O N
I/O addresses, DMA channels, and Interrupt levels can
be entered in various ways, including via the BIOS setup
utility, the control software for the I/O device, or the
hardware. If any two ports or devices, serial or parallel,
have the same I/O address assigned, your notebook will
not function normally. Please keep a record of original
settings before making any changes in the event that a
restoration is required. See your hardware and software
documentation as well as the setup utility to determine
settings, limitations, etc.
Infrared Port:
Mode:
I/O Address:
Interrupt:
I/O Address:
DMA Channel:
Parallel Port:
Mode:
I/O Address:
Interrupt:
F1
Help
ESC
Exit
PhoenixBIOS Setup Utility
Advanced
Serial/Parallel Port Configurations
Select Item
-/Space
Select Menu
Figure 5. Serial/Parallel Port Configuration Submenu
P O I N T
To prevent IRQ and address conflicts, avoid changing
the default settings. If you must change the settings,
you can call 1-800-8FUJITSU for technical assistance.
C A U T I O N
The BIOS will warn you of a resource conflict by placing
a yellow asterisk next to each device that is in conflict.
P O I N T
All I/O addresses in Table 5 are in hexadecimal.
[Enabled]
[FIR]
[2E8 - 2EF]
[IRQ 3]
[118-11F]
[DMA 3]
[Enabled]
[Bi-directional]
[378-37F]
[IRQ 7]
Change Values
Enter
Select
Sub-Menu
A d v a n c e d M e n u
Item Specific Help
[Disabled]
The port is disabled.
[Enabled]
The port is enabled
with user configuration.
[Auto]
The port is configured
depending on 'Plug &
Play OS' setting.
F9
Setup Defaults
F10
Save and Exit
13