Fujitsu LifeBook C-6591 Bios-Handbuch - Seite 8
Blättern Sie online oder laden Sie pdf Bios-Handbuch für Laptop Fujitsu LifeBook C-6591 herunter. Fujitsu LifeBook C-6591 40 Seiten. Bios setup utility
Auch für Fujitsu LifeBook C-6591: Software-Handbuch (39 seiten)
L i f e B o o k C S e r i e s B I O S
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Maximum
Display only
Capacity:
Multi-Sector
Disabled
Transfers:
2 Sectors
4 Sectors
8 Sectors
16 Sectors
32 Sectors
64 Sectors
128 Sectors
LBA Mode
Disabled
Control:
Enabled
PIO Transfer
Standard
Mode:
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
DMA Transfer
Disabled
Mode:
Multiword
DMA 1
Multiword
DMA 2
Ultra DMA 0
Ultra DMA 1
Ultra DMA 2
C A U T I O N
A bootable CD-ROM may have either a floppy disk for-
mat or a hard drive format. When the bootable CD-
ROM is used, the drive allocations change automatically
without changing the BIOS setup. If a floppy disk for-
mat CD-ROM is used, the CD-ROM becomes Drive A.
The CD-ROM will only take Drive C: (hard drive for-
mat) if the internal hard drive is not present or is dis-
abled. The bootable CD-ROM can never use a C:
designation if a formatted internal hard drive is present,
since the C: designator is always reserved for the inter-
nal hard drive.The boot sequence ignores the new drive
designations; however, your application software will
use the new designations.
8
Default
Description
–—
Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Hard Disk is selected.
[16 Sectors]
This option cannot be changed when Auto is selected. Specify the
number of sectors per block for multiple sector transfer. MAX refers
to the size the disk returns when required.
[Enabled]
Enables or disables logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed when
Auto is selected.
[Fast PI0 4]
Selects the method for moving data to/from the drive. Autotype
the drive to select the optimum transfer mode. This option cannot
be changed when Auto is selected. Multi-word DMA is
automatically set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3,
and set to mode 2 for Fast PIO 4 / DMA.
[Ultra DMA 2]
Selects the method for moving data to/from the drive. Autotype
the drive to select the optimum transfer mode. This option cannot
be changed when Auto is selected.
Be careful of the operating environment when booting
from a CD-ROM or you may overwrite files by mistake.
C A U T I O N