Brother P-touch E550W Handbuch zur Schnelleinrichtung - Seite 30
Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Etikettenhersteller Brother P-touch E550W herunter. Brother P-touch E550W 48 Seiten.
Seite drucken
GETTING STARTED
Setting
AC Adapter
• If you connect the AC adapter to the P-touch after you specified "Auto Power Off", the setting
for "AC Adapter" becomes valid.
• The default value is "1hr." for the AC Adapter and "30min." for the Li-ion battery.
• Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape
cassette.
• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon
to be discharged with the tape. The tape may no longer be functional after the ink
ribbon discharges.
• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape
to jam.
Feed & Cut
The Feed & Cut function feeds 24.5 mm of blank tape, and then cuts the tape.
1
Press the Feed & Cut key.
"Feed & Cut?" will appear on the LCD display.
2
Using the
The message "Feeding Tape... Please Wait" appears while the tape is fed, and then the
tape is cut.
To exit or cancel this function press Esc.
Feed Only
This function will advance the tape approximately 24.5 mm, resulting in a blank label sticking
out of the tape cassette. This action is recommended when using Fabric tapes, which should
be cut using scissors.
30
Feeding Tape
Auto Power-Off Time
Value
Off
10min.
20min.
30min.
40min.
50min.
1hr.
2hr.
4hr.
8hr.
12hr.
Feeding Tape
or
key to select the "Feed & Cut" and then press either OK or Enter.
Setting
Li-ion Battery
Value
Off
10min.
20min.
30min.
40min.
50min.
1hr.