Brother P-Touch E850TKW Handbuch zur Schnelleinrichtung - Seite 5
Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Etikettenhersteller Brother P-Touch E850TKW herunter. Brother P-Touch E850TKW 9 Seiten.
Seite drucken
LCD
Home Screen
1
2
3
4
9
1
Cable Label
Specifies the label type from the following seven types: Faceplate/Cable
Wrap/Cable Flag/Patch Panel/Punch-Down Block/Die-cut Flag/Inverted
Label.
2
Create Tube
Displays the tube creation screen.
3
Create Label
Displays the label creating screen.
4
Transferred Templates
Retrieves data that was transferred from a computer.
5
Auto Format
Specifies the label format from the preset templates and layouts.
6
File
Retrieves data that is saved in the file memory.
7
Settings
Specifies various settings for the P-touch.
8
Register Programmable Function
Registers, deletes, and renames programs.
9
Wireless Connection
The left icon indicates the status of the Wi-Fi
icon indicates the status of the Wireless Direct connection.
Connected in Wi-Fi mode
Disconnected in Wi-Fi mode
Wireless direct mode ON
Establishing connection by Setup Wizard
(Blinking)
(Off)
Wireless connection OFF
10 Battery Level
Indicates the remaining battery level. It appears only when using the
Li-ion battery.
- Full
- Low
- Half
- Empty
Tube Creation Screen
NOTE
When you open the tube creating screen for the first time after
purchasing the P-touch, the screen for setting the diameter and length of
the installed tube appears.
1
2
7
10
11
1
Caps Mode
Indicates that the Caps mode is on.
2-6 Style Guidance
Indicates the current character size (2), character width (3), style (4),
6/9 accent (5), and alignment (6) settings.
7
Page Number
Indicates the page number.
8
Enter/Return Symbol
Indicates the end of a line of text.
9
Cursor
Indicates the current data input position. Characters are entered to the
left of the cursor.
5
6
7
8
10
®
connection and the right
- Charging
3 4 5 6
8
9
12
13
10 Wireless Connection
Indicates the current status of the wireless connection. See Wireless
Connection in the explanation of the Home screen.
11 Tab Key Display
Indicates that you can press the Tab key to display the print quantity
setting screen.
12 Tube Size
Indicates the tube size as follows according to the entered text: Tube
diameter × Tube length. If the tube length has been specified,
appears on the right side of the tube size.
13 Battery Level
Indicates the remaining battery level. It appears only when using the
Li-ion battery. See Battery Level in the explanation of the Home screen.
Label Creation Screen
1
2
10
11
16
17
1
Caps Mode
Indicates that the Caps mode is on.
2-8 Style Guidance
Indicates the current font (2), character size (3), character width (4),
character style (5), line (6), frame (7), and alignment (8) settings. The
alignment guidance may not be displayed depending on the selected
label type.
9
Layout Guidance
Indicates the orientation, layout, separator, reverse, and repeated text
settings. The displayed items vary according to the selected label type.
10 Block Number
Indicates the block number.
11 Line Number
Indicates the line number within the label layout.
12 Page Separator Line
Indicates the end of one page and the beginning of the next page.
13 Block Separator Line
Indicates the end of a block.
14 Enter/Return Symbol
Indicates the end of a line of text.
15 Cursor
Indicates the current data input position. Characters are entered to the
left of the cursor.
16 Wireless Connection
Indicates the current status of the wireless connection. See Wireless
Connection in the Home Screen section.
17 Tab Length Setting
Indicates the set tab length.
18 Tape Size
Indicates the tape size as follows for the text entered: Tape width × Label
length. If the label length has been specified,
side of the tape size.
19 Battery Level
Indicates the remaining battery level. It appears only when using the
Li-ion battery. See Battery Level in the Home Screen section.
Feeding Tape
IMPORTANT
•
Be sure to feed tape to remove any slack in the tape and ink ribbon
after inserting the tape cassette.
•
Do not pull the label when the P-touch is ejecting it from the tape
exit slot. Doing so will cause the ink ribbon to be discharged with the
tape. The tape may no longer be functional after the ink ribbon
discharges.
•
Do not block the tape exit slot during printing or when feeding tape.
Doing so will cause the tape to jam.
Feed and Cut
The Feed and Cut function feeds approximately 22.3 mm of blank tape, and
then cuts the tape.
1.
Press the
(Feed and Cut) button.
[Feed & Cut?] appears on the LCD.
3
4 5 6 7 8
9
12
13
14
15
18
19
also appears on the right
also