Brother P-touch GL100 Benutzerhandbuch
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Etikettenhersteller Brother P-touch GL100 herunter. Brother P-touch GL100 1 Seiten. Brother label printer user's guide
Auch für Brother P-touch GL100: Benutzerhandbuch (2 seiten)
Seite drucken
English
/ Français
USER'S GUIDE
www.brother.ca
LN9974001
Printed in China
INTRODUCTION
With your GL100, you can create labels for any application. Select from the many frames, character
sizes and styles to design beautiful custom labels. In addition, the variety of tape cartridges available
allows you to print labels with different widths and exciting colours.
Read this manual carefully before starting and keep the manual in a handy place for future reference.
Industry Canada Compliance Statement (Canada Only)
Avis de conformité aux normes d'Industrie Canada (Canada seulement)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
KEYBOARD & LCD
LCD indicators
Size
Upper case/Lower case
Function
Underline/Frame
Style
Power key
Cursor key
Num keys/Function shortcuts
The LCD shows one row of 8 characters; however,
the text that you enter can be up to 55 characters in length.
Character keys
Power On/Off
Press a to turn on/off the machine.
The machine automatically turns off if no key is pressed
within 5 minutes.
Accent key
Symbol key
Entering ACCENTED CHARACTERS
"
g
> E
> b
> e
Letter
Accented characters
Letter
Accented characters
A
a
C
c
D
d
E
e
I
i
L
l
N
n
O
o
R
r
S
s
T
t
U
u
Y
y
Z
z
NOTE: • You can also display the characters by pressing g / b.
• To go to the next letter group, press g.
• To skip to a different letter group, press the corresponding charac-
ter key.
• You can also scroll the characters in each letter group by pressing
the corresponding character key repeatedly.
PRINTING
f
c
TEXT PREVIEW
(
+
You can preview the text before printing.
"
f > f/b
> e
NOTE:
• The LCD shows the whole text and the label length (mm/inch), then returns to the original
text.
• Only the text can be previewed, but not the font, style, size, underline/frame or any addi-
tional features.
f
i
FEEDING (TAPE FEED)
(
+
"
f > f/b
> e
PRINTING
"
c
NOTE:
• To cut off the label, push in the tape cutter lever on the upper-right corner of the machine.
• To prevent damage to the tape, do not try to cut while the message PRINT or FEED is
displayed.
f
TAPE MARGIN
(
+
"
f > f/b
> e > f/b
> e
FULL/HALF/NARROW is for leaving equal margins on both sides of the text.
NOTE:
Cut along the printed dots (:) with scissors so the text is centred in the label.
FULL
HALF
NARROW
1"
1"
1/2"
1/2"
1/6"
1/6"
(25mm)
(25mm)
(12mm)
(12mm)
(4mm)
(4mm)
GENERAL PRECAUTIONS
• Use only Brother TZ tapes with this machine. Do not use tapes that do not have
the
mark.
• Do not pull on the tape being fed from the P-touch, otherwise the tape cassette
may be damaged.
• Do not attempt to cut the tape while printing or feeding since this will damage the tape.
• Do not clean the machine with alcohol or other organic solvents. Only use a soft, dry
cloth.
• Remove the batteries and disconnect the AC adapter if you do not intend to use the
machine for an extended period of time.
Note:
If power is disconnected for more than three minutes, all text shown in the dis-
play and any text files stored in the memory will be lost. Language and unit
settings will also be cleared.
• Do not put any foreign objects into or heavy objects on the machine.
• Do not expose the machine to extremely high temperatures or high humidity. Never
leave it on the dashboard or in the back of your car.
• Avoid using the machine in extremely dusty places. Keep it out of both direct sunlight
and rain.
• Do not leave any rubber or vinyl on the machine for an extended period of time, oth-
erwise the machine may be stained.
• Do not touch the print head mechanism. If the head is touched, clean it immediately
with a soft wipe (e.g. a cotton swab) to avoid permanent damage.
• To avoid injuries, do not touch the cutter's edge.
• Use only the AC adapter designed exclusively for this machine. Use of any oth-
er adapter may void the warranty.
• Please contact your Brother dealer for details.
SPECIFICATIONS
4.32" (W) ✕ 7.84" (D) ✕ 2.2" (H)
Dimensions:
(108mm (W) ✕ 196mm (D) ✕ 55mm (H))
Weight:
0.74 lbs. (335g) (without batteries and tape cassette)
Power supply:
Six AAA size alkaline batteries or optional AC adapter
(AD-30/AD-24)
Tape cassette:
Brother TZ tape
1/4" / 3/8" / 1/2" (width) (6mm, 9mm, 12mm (width))
Cutter unit:
TC-5 (replacement)
Cursor
Print key
Function key
Enter key
Backspace key
Caps key
Space key
DESIGNING LABELS
Setting FONT
"
f > f/b
> e > f/b
HELSINKI
OKLAHOMA
Setting SIZE
"
f > f/b
> e > f/b
AUTO automatically adjusts the text size according to the tape width.
SIZE1
SIZE2
SIZE3
SIZE4
SIZE5
NOTE:
• Two line texts are printed in SIZE1 regardless of the setting.
• Only AUTO, SIZE1 and SIZE2 can be used on 1/4" (6mm) tapes.
Setting STYLE
"
f > f/b
> e > f/b
NORMAL
BOLD
OUTLINE
SHADOW
ITALIC
I+BOLD (ITALIC + BOLD)
I+OUTL (ITALIC + OUTLINE)
I+SHADOW (ITALIC + SHADOW)
VERTICAL
MIRROR
NOTE:
• Two line texts are printed in NORMAL regardless of the setting.
• Use clear tape in MIRROR, so the labels appear on the other side when stuck on glass,
windows or other transparent surfaces.
CHAIN is for printing more than 1 copy of a label with minimum margin
<e.g. 1>. You can also create a label containing texts in various styles; print
a text in one style, and before feeding, enter the second text in another style
<e.g. 2>.
)
NOTE:
FEED THE TAPE BEFORE USING THE CUTTER (see FEEDING/PRINTING). Otherwise
A PART OF THE TEXT MAY BE CUT OFF. Do not try to pull the tape since this may
damage the tape cassette.
CHAIN
<e.g. 1>
<e.g. 2>
ABC
ABC
ABC
ABC
ABC
DEF
(feed & cut)
(feed & cut)
Print Option/REPEAT PRINTING
)
You can print up to 9 copies of each label.
"
f > f/b
> e > f/b
e
> f/b
> e
NOTE:
• When the tape margin is set to CHAIN, FEED THE TAPE BEFORE USING THE CUTTER
(see FEEDING/PRINTING). Otherwise A PART OF THE TEXT MAY BE CUT OFF. Do
not try to pull the tape since this may damage the tape cassette.
• When the tape margin is set to FULL/HALF/NARROW, cut along the printed dots (:) with
scissors to separate the labels.
Print Option/NUMBERING
You can print many copies of the same text while increasing a selected num-
ber by 1 after each label is printed.
.
)
Example: To print copies of a label containing a serial number (0123, 0124 and 0125)
"
b
> f > f/b
f/b
> e
> f/b
> e
NOTE:
• The last number that will be printed must be larger than the number selected in the text,
otherwise the message ERROR appears.
• When the tape margin is set to CHAIN, FEED THE TAPE BEFORE USING THE CUTTER
(see FEEDING/PRINTING). Otherwise A PART OF THE TEXT MAY BE CUT OFF. Do
not try to pull the tape since this may damage the tape cassette.
• When the tape margin is set to FULL/HALF/NARROW, cut along the printed dots (:) with
scissors to separate the labels.
POWER SUPPLY & TAPE CASSETTES
a
Remove the back cover by pressing in the rough area at the top end of the machine.
If a tape cassette is already installed, remove it by pulling it straight up. Also, if batteries are
already installed, remove them.
b
-1 Insert six new AAA-size alkaline batteries, making sure that their poles point in the
correct directions.
Always replace all six batteries at the same time using brand new ones.
b
-2 Insert a tape cassette, making sure that it
snaps into place.
• Make sure that the end of the tape feeds under
the tape guides.
• Be sure to remove the paper tab when install-
ing a new tape cassette.
• If the ink ribbon is loose, use your finger to
wind the toothed wheel in the direction of the
arrow on the cassette.
• Use only Brother TZ tapes with this machine.
c
Attach the back cover by inserting the two hooks at the bottom into the slots on the
machine, then pushing down firmly on the cover until it snaps into place.
After you have installed the tape, feed the tape (see FEEDING) once and then push in the
tape cutter lever to cut the tape.
Optional AC adapter (AD-30/AD-24)
a
Insert the plug on the adapter cord into the
adapter jack on the bottom end of the
machine.
b
Insert the plug into the nearest standard
electrical outlet.
Cutter unit (replacement)
If the cutter blade becomes blunt after repetitive use and the tape can not be cut clean-
ly, replace with new cutter unit (stock no. TC-5) by obtaining from an authorized broth-
er dealer.
GETTING STARTED
a
Start your machine
Supply power by using six AAA batteries or the optional AC adapter,
and then press a.
b
Set the language (English/French/German)
Choose a language with b and press e.
Check the display and press e. (To cancel, press d.)
c
Set the unit (mm/inch)
Choose a unit with b and press e.
Check the display and press e. (To cancel, press d.)
NOTE: • You can also display the languages and units by pressing the cor-
responding Num keys (1-3).
NOTE:
• To cancel operations, press d.
• To delete entries backward, press d.
• To initialize the settings, turn off the machine and then while hold-
ing down f and d, press a to turn the machine back on.
Finally, release f and d.
f
1
(
+
)
Setting UNDERLINE/FRAME
"
> e
f > f/b
> e > f/b
OFF
UNDL (Underline)
BANNER
WOODEN
f
2
(
+
)
NOTE:
No underline or frame is set to texts in VERTICAL style.
> e
Setting TAB
You can make aligned texts by setting tabs.
Example: To set a tab between "abc" and "d"
"
b
> f > f/b
Label image
abc d
Tab
f
3
(
+
)
NOTE:
The cursor should be positioned where you set a tab.
> e
Setting TAB LENGTH (0.0" - 4.0"/0-100mm) (
"
f > f/b
> e > b
NOTE:
You can also select the length by entering the length with Num keys.
MEMORY
F
9
(
+
)
You can store up to 9 frequently used text files and recall them to create labels more
quickly and easily.
"
f > f/b
> e >
To STORE;
"
f/b
> e
To RECALL;
f
,
(
+
)
"
f/b
> e
To DELETE;
>
"
f/b
> e
NOTE:
• When the memory is full, delete one or more files and then store the new file.
• You can also choose a file number by pressing the corresponding Num key (1-9).
FUNCTION SHORTCUTS
f
,
In addition to the basic steps to search for a function, GL100 provides you with function
(
+
)
shortcuts so you can easily jump to a frequently used function just by pressing
shortcut key shown in the table below. To confirm, press
Key LCD message
Function
Key LCD message
1
8
FONT
Character font
2
9
SIZE
Character size
MEMORY
> e >
3
0
STYLE
Print style
CLEAR
4
.
UNDL/FRM
Underline/Frame
MARGIN
5
,
TAB
Tab setting
PRINT OP
6
TAB LEN
Tab length
c
PREVIEW
7
LENGTH
Label length
i
FEED
NOTE:
• PRINT OP contains two functions, REPEAT PRINTING and NUMBERING.
e
• For PREVIEW and FEED, press
to preview/feed after the LCD message appears.
NOTE:
You can also refer to the chart indicated on the back of the machine.
MAKING TEXT
Switching UPPER CASE/LOWER CASE
"
j
Upper case
Lower case
ABC
ABC
abc
abc
Making TWO LINE TEXT
Move the cursor to where the second line starts and press e.
NOTE:
Use either 3/8" (9 mm) or 1/2" (12 mm) wide tape for two line texts.
Display
Label image
Entering SYMBOLS
"
h
> B
Group
Symbols
A
B
C
D
E
NOTE:
• You can also display the symbols by pressing
h
• To go to the next group, press
• To skip to a different group, press the corresponding character key of the group.
• You can also scroll the symbols in each group by pressing the corresponding character
key of the group repeatedly.
f
4
(
+
)
Setting LABEL LENGTH (AUTO/1.6" - 11.8"/40-300mm) (
"
> e
f > f/b
ROUND
NOTE:
• You can also select the length by entering the length with Num keys.
• To return to AUTO, press any alphabet key or
VINE
Using AUTO FORMAT
You can choose label length from six formats to create labels for various ap-
plications.
f
5
(
+
)
"
f > f/b
LCD
Application
Length
VCR VHS
VCR VHS
5.5"(140mm) FILE TAB
> e
FD 3.5"
3.5" Floppy Disk
2.7"(68mm)
CD CASE
CD
3.9"(100mm) VIDEO 8 VCR 8mm (Video 8) 3.6"(92mm)
To CLEAR
All text and settings will be cleared.
"
f
6
f > f/b
+
)
> e
ERROR MESSAGE LIST
ERROR
An error occurred.
BATTERY
The batteries are weak.
B A T T E R Y
The batteries are empty.
The maximum number of characters (55 characters)
FULL
have already been entered or the memory is full.
> b
> e
LONG TXT
The text length exceeds the selected label length.
> b
> e
TROUBLESHOOTING
Problem
> b
> e
The display stays blank after you
• Check that the batteries are correctly inserted.
have turned on the machine.
• If the batteries are weak, replace them.
• Check that the adapter is correctly connected.
The machine does not print, or the
• Check that the tape cassette has been inserted
printed characters are blurred.
F
(
+...)
• If the tape cassette is empty, replace it.
• Check that the character size is appropriate for the
The printed characters are not
• If the batteries are weak, replace them.
formed properly.
f
and the
e
(or the shortcut key again).
Striped tape appears.
• The tape cassette is empty. Replace it.
The memory has cleared on its own.
• The batteries may be weak. Replace them.
Function
A blank horizontal line appears
• There may be some dust on the print head.
A/F
Auto Format
through the printed label.
Memory
Clear text + style
The machine has "locked up" (i.e.,
• Turn off the machine, and then while holding down
Tape margin
nothing happens when a key is
Repeat/Numbering
pressed, even though the machine is
Text preview
on).
Tape feed
Print head
Tape cutter lever
Cutter unit
Tape exit slot
ABC
DEF
> b
> e
Group
Symbols
F
G
H
I
h
b
/
.
.
f
7
+
)
> e > b
> e
i
.
f
8
(
+
)
> e > f/b
> e
LCD
Application
Length
File Tab
2.8"(70mm)
AUDIO
Audio Cassette
3.5"(89mm)
f
0
(
+
)
> e
Solution
correctly.
width of the tape that is used.
Remove the tape cassette and use a dry cotton
swab to gently wipe the print head with an up-and-
down motion.
f
d
a
and
, press
to turn the machine back
on. Finally, release
f
and
d
.
Note: The text and formats in the display and all
text files stored in the memory are erased.
Also, the language and unit settings will be
cleared.