AEG L 70260 TL1 Benutzerhandbuch - Seite 22

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Waschmaschine AEG L 70260 TL1 herunter. AEG L 70260 TL1 28 Seiten.

www.aeg.com

Problem

The appliance does not

fill with water and drain

immediately.

The appliance does not

drain the water.

The spin phase does not

operate or the washing

cycle lasts longer than

usually.

There is water on the

floor.

You cannot open the ap-

pliance lid.

Possible solution

Make sure that the pressure of the water supply is not too low.

For this information, contact your local water authority.

Make sure that the water tap is not clogged.

Make sure that the filter of the inlet hose and the filter of the

valve are not clogged. Refer to "Care and cleaning".

Make sure that the inlet hose has no kinks or bends.

Make sure that the connection of the water inlet hose is cor-

rect.

Make sure that the drain hose is in the correct position. The

hose may be too low.

Make sure that the sink spigot is not clogged.

Make sure that the drain hose has no kinks or bends.

Make sure that the drain filter is not clogged. Clean the filter, if

necessary. Refer to 'Care and cleaning'.

Make sure that the connection of the drain hose is correct.

Set the drain programme if you set a programme without drain

phase.

Set the drain programme if you set an option which ends with

water in the tub.

Set the spin programme.

Make sure that the drain filter is not clogged. Clean the filter, if

necessary. Refer to 'Care and cleaning'.

Adjust manually the items in the tub and start the spin phase

again. This problem may be caused by balance problems.

Make sure that the couplings of the water hoses are tight and

there is not water leakages.

Make sure that the drain hose have no damages.

Make sure you use the correct detergent and the correct quan-

tity of it.

Make sure that the washing programme is finished.