Fujitsu Lifebook E8010 Bios-Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Bios-Handbuch für Laptop Fujitsu Lifebook E8010 herunter. Fujitsu Lifebook E8010 30 Seiten. Lifebook e series

Seite drucken
L i f e B o o k E S e r i e s B I O S
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what ATA devices are installed.
Main
Primary Master [HITACHI_DK23FA-40-(PM)]
Type:
Total Sectors:
Maximum Capacity:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Type:
Auto
None
CD-ROM
Hard Disk
LBA Format
Total Sectors:
---
Maximum
---
Capacity:
CHS Format
Cylinders:
A number between
0 and 65,535
6
PhoenixBIOS Setup Utility
[Auto]]
LBA Format
78140160
40008MB
[16 Sectors]
[Enabled]
[Multiword DMA 2]
[Disabled]
Select Item
-/Space
Select Menu
Enter
Figure 2. Primary Master Submenu
Default
[Auto]
---
---
–—
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
Change Values
F9
Select
Sub-Menu
F10
Description
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following Setup items do not appear. Select CD-ROM if a CD-
ROM drive is installed at this connection. If Hard Disk is selected,
you must specify the number of Cylinders, Heads, and Sectors for
the drive.
Logical Block Addressing (LBA)
The total number of sectors on your hard disk
The maximum capacity of your hard disk
Cylinders/Heads/Sectors
This item is active only when Hard Disk is selected as the type. This
field is changed by incrementing (pressing the [Spacebar]) or by typ-
ing in the number.
Setup Defaults
Save and Exit