Brother P-touch PT-D610BT Handbuch

Blättern Sie online oder laden Sie pdf Handbuch für Etikettenhersteller Brother P-touch PT-D610BT herunter. Brother P-touch PT-D610BT 9 Seiten.
Auch für Brother P-touch PT-D610BT: Handbuch (9 seiten), Schnellstart-Handbuch (9 seiten)

Seite drucken

P-TOUCH PT-D610BT

Thank you for purchasing the PT-D610BT (hereafter referred to as "the Label Maker"). Your

PT-D610BT produces professional, high-quality, durable labels. In addition, the variety of tape

cartridges available allows you to print labels with different widths and exciting colors.

Please read this guide, including the Product Safety Guide, before using this Label Maker. After

reading this guide, keep it in a safe place.

For FAQs, troubleshooting, and to download software and manuals, visit support.brother.com.

Supplies

Brother TZe Tape Cassette

Available widths: 3.5 mm, 6 mm, 9 mm, 12 mm, 18 mm, 24 mm

Head Cleaning Tape Cassette

TZeCL5

Before Use

1. Overview

Tape Viewer

Tape Exit Slot

D02D59001

Application Download Label

AC Adapter Jack

USB Port

Tape Cassette

Product Safety Guide

Safety Precautions

Be sure to read this section before using the product. It contains important safety instructions.

We recommend that you keep this document nearby for future reference.

• For servicing, adjustments, or repairs, contact Brother Customer Service or your local Brother dealer.

• If the product operates abnormally or any error occurs, or if any cable is damaged, turn off the product,

disconnect all cables, and contact Brother Customer Service or your local Brother dealer.

• We assume no responsibility for damages arising from earthquakes, fire, other disasters, actions of third

parties, the user's intentional or negligent operation, misuse, or operation under other special conditions.

• We assume no responsibility for damage (such as losses, loss of business profit, lost profits, business

disruptions, or a lost means of communication) that may result from the use of, or inability to use, the

product.

• We assume no responsibility for damages that may result from incorrect operation of the product by

connecting incompatible equipment or using incompatible software.

• We assume no responsibility for any damages or lost profit arising from the use of labels created with this

product, the disappearance or change of data due to failure, repair, or consumables and we do not accept

any claim from a third party.

• Brother reserves the right to make changes without notice in the specifications and materials contained

herein. Furthermore, Brother shall not be responsible for any damages (including consequential) caused by

reliance on the materials presented, including but not limited to typographical and other errors relating to

the publications.

• For more information about software, see the User's Guide, which can be found on the Brother support

website at support.brother.com.

• The latest version of your product documentation is available on the Brother support website at

support.brother.com.

• The available models, accessories, and supplies may vary depending on the country or region.

• This product is approved for use in the country or region of purchase only.

WARNING

Failure to observe instructions and warnings could result in death or serious injuries.

• DO NOT operate, charge, or store the Label Maker, AC Adapter, USB Cable, and Alkaline Batteries in the

following locations (otherwise a fire, electrical shock, smoke, or damage may occur):

- Near water, such as in a bathroom or near a water heater, or in an extremely humid or cold location.*

- In a location where it is exposed to rain or moisture.

- In an extremely dusty location.

- In an extremely hot location, such as near open flames, heaters, or in direct sunlight.

- In a closed car in direct sunlight.

- In a location where condensation may form.

- At a high altitude.

- During a thunderstorm.

• DO NOT use the Label Maker with a foreign object in it. If water, a metal object, or any other foreign object

enters the Label Maker, disconnect the AC Adapter and remove the batteries (if installed), and then contact

your local Brother dealer for repairs.

• If foreign objects are inserted into the Label Maker or its slots, connectors, ports, or Battery Compartment,

stop using the Label Maker, turn off the power, and then disconnect each cable or remove the batteries

(if installed).

• Stop using the Label Maker if there are noticeable abnormalities such as smell, heat, noise, deformities,

or discoloration.

• DO NOT use a damaged AC Adapter.

To avoid damaging the Label Maker, AC Adapter, USB Cable, or Alkaline Batteries, DO NOT:

- Place heavy objects on them.

- Dissamble or modify them.

- Drop or hit them.

- Allow them to get wet, for example, by handling them with wet hands or spilling liquids on them.

• DO NOT insert foreign objects into openings such as the Tape Exit Slot, USB Port, or Battery Compartment.

• DO NOT allow babies and children to play with the plastic bag that contained the Label Maker.

Dispose of the bag or keep it away from babies and children. There is a risk of suffocation.

* For more information, see the "Specifications" section in your model's User's Guide.

2. Install Batteries or Connect the AC Adapter

Remove the protective material (first use only) before using the Label Maker.

Batteries

• When using the AC Adapter (AD-E001A):

- Insert the Adapter cord connector into the AC Adapter

Jack on the side of the printer.

- Insert the plug into the nearest standard electrical

socket. For memory backup, we recommend using AA

alkaline batteries (LR6) together with the AC Adapter.

• To safeguard and back up the Label Maker's memory,

when the AC Adapter is unplugged, keep AA alkaline

batteries (LR6) installed in the Label Maker.