AEG L 75470 FL Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Waschmaschine AEG L 75470 FL herunter. AEG L 75470 FL 36 Seiten.
Auch für AEG L 75470 FL: Benutzerhandbuch (36 seiten), Benutzerhandbuch (36 seiten), Benutzerhandbuch (32 seiten), Benutzerhandbuch (36 seiten)

Seite drucken

• The programme time

When the programme starts, the time decreases with steps of 1 mi-

nute.

• The delay start

When you press the delay start button, the display shows the delay

start time.

• Alarm codes

If the appliance has a malfunction, the display shows alarm codes. Re-

fer to 'Troubleshooting' chapter.

• Err

The display shows this message for some seconds if:

– You set a function that is not applicable for the programme.

– You change the programme while it operates.

The indicator of the Start/Pause button

•

When the programme is completed.

1) Only available for Spin/Drain programme.

2) The symbols appear on the display when the related phase or function is set.

5.4 Start/Pause button

Press button

to start or interrupt a

programme.

5.5 Delay start button

Press button

to delay the start of a

programme from 30 minutes to 20 hours.

5.6 Time save button

Press the button

programme duration.

• Press one time to set 'Shortened dura-

tion' for items with daily soil.

• Press two times to set 'Extra Quick' for

items with almost no soil.

Some programmes accept only

one of the two functions.

5.7 Extra rinse button

Press button

to add rinsing phases to

a programme.

Use this function for persons allergic to

detergents and in areas where the water

is soft.

to decrease the

flashes.

5.8 Stain button

Press button

to add the stain phase

to a programme.

Use this function for laundry with hard

stains to remove.

When you set this function, put the stain

remover into compartment

This function increases the pro-

gramme duration.

This function is not available with

a temperature lower than 40° C.

5.9 Spin button

Press this button to:

• Decrease the maximum speed of the

spin phase when you set a pro-

gramme.

The display shows only the spin

speeds available with the set

programme.

• Deactivate the spin phase.

• Activate the 'Rinse Hold' function. Set

this function to prevent fabric creases.

The appliance does not drain the wa-

ter when the programme is comple-

ted.

ENGLISH