Brother P-Touch PT-E550WNIVP Handbuch zur Schnelleinrichtung - Seite 32

Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Etikettenhersteller Brother P-Touch PT-E550WNIVP herunter. Brother P-Touch PT-E550WNIVP 49 Seiten.

Seite drucken

GETTING STARTED

Close the rear cover.

• Place the P-touch labeling system on a flat surface as shown

in the illustration, and then attach the rear cover.

• If you cannot attach the rear cover, check to ensure the white

lever (1) is in the up position. If not, lift the lever, and then

attach the cover.

• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to

be discharged with the tape. The tape may no longer be functional after the ink ribbon

discharges.

• Store tape cassettes in a cool dark location, away from direct sunlight and high temperature, high

humidity, or dusty locations. Use the tape cassette as quickly as possible after opening the sealed

package.

Extra Strength Adhesive Tape:

• For rough and textured surfaces, we recommend using Extra Strength Adhesive Tape.

• Although the instruction sheet included with the Extra Strength Adhesive Tape cassette

recommends cutting the tape with scissors, the tape cutter that this P-touch labeling

system is equipped with is able to cut Extra Strength Adhesive Tape.

Press the

(Power) button to turn the P-touch labeling system on.

Press and hold the

• Your P-touch labeling system has a power saving function that automatically turns itself off if

no key is pressed within a certain time, under certain operating conditions. Refer to the "Auto

Power-Off Time" for details.

Auto Power-Off Time

If you use the AC adapter or Li-ion battery, you can change the setting of the auto power-off

time.

When you use alkaline batteries or Ni-MH batteries, the auto power-off time cannot be changed.

(The time is fixed to 20 minutes.)

Press the Menu key, select "Auto Power Off" using the

OK or Enter key.

Select the battery shown on the LCD display by using the

using the

"AC Adapter" or "Li-ion Battery" can be selected.

Press the OK or Enter key.

Turning Power On/Off

(Power) button again to turn the P-touch labeling system off.

key.

key, and then press the

key and set the value