Brother PT-E550W Handbuch zur Schnelleinrichtung - Seite 31

Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Etikettenhersteller Brother PT-E550W herunter. Brother PT-E550W 47 Seiten. Electronic labeling system
Auch für Brother PT-E550W: Handbuch zur Schnelleinrichtung (50 seiten), Handbuch zur Schnelleinrichtung (49 seiten)

Seite drucken
Brother PT-E550W Handbuch zur Schnelleinrichtung
Setting
AC Adapter
• If you connect the AC adapter to the P-touch labeling system after you specified "Auto Power
Off", the setting for "AC Adapter" becomes valid.
• The default value is "1hr." for the AC Adapter and "30min." for the Li-ion battery.
• Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape
cassette.
• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to
be discharged with the tape. The tape may no longer be functional after the ink ribbon
discharges.
• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape
to jam.
Feed & Cut
The Feed & Cut function feeds 24.5mm of blank tape, and then cuts the tape.
1
Press the Feed & Cut key.
"Feed & Cut?" will appear on the LCD display.
2
Using the
or
The message "Feeding Tape... Please Wait" appears while the tape is fed, and then the
tape is cut.
To exit or cancel this function press Esc.

Feed Only

This function will advance the tape approximately 24.5mm, resulting in a blank label sticking
out of the tape cassette. This action is recommended when using Fabric tapes, which should
be cut using scissors.
Auto Power-Off Time
Value
Off
10min.
20min.
30min.
40min.
50min.
1hr.
2hr.
4hr.
8hr.
12hr.

Feeding Tape

key to select the "Feed & Cut" and then press either OK or Enter.
Setting
Li-ion Battery
Value
Off
10min.
20min.
30min.
40min.
50min.
1hr.
31
Feeding Tape