AEG L 87695 WD Benutzerhandbuch - Seite 23
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Waschmaschine AEG L 87695 WD herunter. AEG L 87695 WD 44 Seiten.
Seite drucken
USING THE APPLIANCE - DRYING ONLY
WARNING!
Open the water tap. Put the drain hose
in the sink or connect to the drain pipe.
• Load the laundry.
• Turn the programme dial to the pro-
gramme suitable for the items to dry.
The display shows a minimum time val-
ue.
To have best performances in dry-
ing when you wash the laundry set
a spin cycle at the maximum
speed allowed for your type of
items.
You can dry your laundry in two ways:
With the automatic drying
• Press the button
until a black line appears under one of
the dryness level symbol:
• The display shows a time value, calcula-
ted on a default load size. If the amount
of your laundry is more or less than the
default size, the appliance adjusts auto-
matically the time value during the cy-
cle.
• Press button
gramme.
The drying symbol comes on.
The anti-crease symbol
comes on.
The drying time symbol
comes on.
again and again
4
The extra dry level comes
on.
the cupboard dry level
comes on.
The Iiron dry level comes on.
The drying time symbol goes
off.
to start the pro-
6
The door locked symbol
comes on.
The drying symbol starts to
flash.
The symbol of the set level
stays on.
The other level symbols go
off.
You cannot set all levels for all
kind of laundry.
With the timed drying:
• Press the button
set the time value (see the «Drying Pro-
gramme» table).
The drying symbol comes
on.
The anti-crease symbol
comes on.
The drying time symbol
comes on.
Set time value
• Each time you press this button the
time value increases by 5 minutes.
• After some seconds the set time value
on the display changes: the appliance
calculates also the duration of the anti-
crease and the cooling phases.
Final time value
• Press button
6
to start the pro-
gramme. The display shows the new
time value every minute.
The drying symbol starts
to flash.
The door locked symbol
comes on.
If you set the time value of only 10
minutes, the appliance performs
only a cooling phase.
At the end of the programme
• The appliance stops automatically.
• The acoustic signals operate.
•
In the display
comes on.
• The indicator of the Start/Pause button
6
goes off.
ENGLISH
23
5
again and again to