Brother PT-S215e Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Etikettenhersteller Brother PT-S215e herunter. Brother PT-S215e 18 Seiten.
Seite drucken
2
BASIC USAGE
Entering Text
You can enter a maximum of 80 characters and
spaces for a text label, and 50 characters and
spaces if using templates.
To cancel any operation, press
After pressing
LCD for approximately one second.
Switching Upper Case / Lower Case
Upper case
(
ON)
Caps
Creating Two-Line Ribbons / Tapes
Move the cursor to where you want to start the next
line and press
. Use either 0.35" (9mm) or 0.47"
(12mm) tape for two-line printing.
Line 1
Line 2
NOTE
• The return symbol ( ) appears when you press
the Enter key
.
Entering Tabs
/
• The tab symbol
tab in the text.
Changing Tab Length
/
/
(0-100 mm)]
• To return to the default tab length, press
.
• Please note : the default length varies based on
your ribbon or tape size.
.
, [Accepted] appears on the
Lower case
(
OFF)
Caps
The image
[Tab]
appears when you insert a
[Tab Length]
[Auto / 0.0"-4.0"
Cursor Keys
To move to the end of your text:
+
To move to the beginning of your text:
+
Entering Accented Characters
-
• Refer to the Accented Characters table in this
guide.
• The order of accented characters varies based
on the language you selected.
Changing Ribbon / Tape Length
/
/
(30-999 mm)]
NOTE
• After printing a ribbon, cut along the printed dots
(:) with scissors so the ribbon length matches
what is shown on the LCD.
• The lock symbol
specific ribbon/tape length.
• To return to the default length (automatic, based
on text length), press
appears on the LCD.
Clearing Text and Settings
To delete individual letters and spaces, press
To delete all text :
+
To delete all text and settings :
+
[Text&Format]
/
/
[Label Length]
[Auto / 1.2"-39.0"
appears when you set a
, and [Auto]
/
[Text Only]
/
.