Brother QL 570 - P-Touch B/W Direct Thermal Printer Handbuch für Einrichtung und Betrieb - Seite 28

Blättern Sie online oder laden Sie pdf Handbuch für Einrichtung und Betrieb für Etikettenhersteller Brother QL 570 - P-Touch B/W Direct Thermal Printer herunter. Brother QL 570 - P-Touch B/W Direct Thermal Printer 43 Seiten. Professional label printer
Auch für Brother QL 570 - P-Touch B/W Direct Thermal Printer: Broschüre (4 seiten), Benutzerhandbuch (36 seiten), Benutzerhandbuch (26 seiten), Benutzerhandbuch (40 seiten), Handbuch für Einrichtung und Betrieb (45 seiten), Benutzerhandbuch (2 seiten), Software-Installationshandbuch (15 seiten)

STEP2 Installing the software

For Network interface cable users (Manual Network Configuration)

(Mac OS

IP Printing at the top of the screen. Enter the

IP address of the printer into the Printer

Address box. Choose QL-XXX from the list

and click [Add] again to add the printer to the

Printer Setup Utility.

(Mac OS

choose IP Printer / IP at the top of the

screen. Enter the IP address of the printer

into the Address box. Choose QL-XXX from

the list and click [Add] again to add the

printer to the Printer Setup Utility.

When specifying the Queue Name, use the value BRNxxxxxxxxxxxx at where

xxxxxxxxxxxx is the Ethernet address.

When the screen returns to the Printer List / Print & Fax screen,

check that "QL-XXX" is added, and close the Printer List / Print &

Fax screen.

Now you can use the machine.

For details on software, see the P-touch Editor Help.

Installing the BRAdmin Light configuration utility for Mac

BRAdmin Light is a utility for the initial setup of Brother network connected devices. It can

also search for Brother products on your network, view the status and configure basic

network settings, such as IP address.

For more information on BRAdmin Light, visit us at http://solutions.brother.com.

If you are using personal firewall software, BRAdmin Light may fail to detect the

unconfigured device. In that case, disable your personal firewall software, try

BRAdmin Light again. Re-start your personal firewall software after the address

information is set.

Double click "BRAdmin Light.pkg" in the

[Mac OS X] folder.

The BRAdmin Light Installer starts up. Follow the

on-screen instructions.

X 10.3.9) Click [Add] and choose

X 10.4.x - 10.5) Click [Add] and