Fujitsu Siemens AMILO Pro answers 2 Erste Schritte - Seite 26
Blättern Sie online oder laden Sie pdf Erste Schritte für Laptop Fujitsu Siemens AMILO Pro answers 2 herunter. Fujitsu Siemens AMILO Pro answers 2 32 Seiten.
Seite drucken
AMILO Pro
The battery discharges too quickly
The battery is either too hot or too cold. In this case the battery indicator flashes.
►
Bring the notebook up / down to a normal temperature again.
If the operating time of the battery mode is extremely short, the battery is probably old and should
be replaced.
You may have an application running that consumes a great deal of power due to frequent
accessing of the hard disk or optical drive.
►
Use the power adapter as frequently as possible.
The maximum brightness may have been set for the screen.
►
Set the screen somewhat darker with the key Fn and the key F6 to reduce the power
consumption.
The power-management features have been deactivated.
►
Check the settings in the BIOS Setup (in the Power menu), and adjust the parameters.
The Suspend/Resume button does not respond properly
The system may be processing.
►
Wait until the system has completed processing.
You have not pressed the Suspend/Resume button long enough to switch off the notebook.
►
Press the Suspend/Resume button until the notebook switches off.
The Standby function has been deactivated in the BIOS Setup.
►
Restart the notebook (ON/OFF switch or warm start) to call the BIOS Setup .
►
When the text <ESC> Diagnostic screen
appears, press the F2 key immediately.
►
Activate the Standby function in the Power menu.
18
<F12> Boot Menu
A26391-K149-Z100-1-7619, Edition 2
<F2> BIOS Setup