Brother TP-M5000N Handbuch zur Produktsicherheit - Seite 6
Blättern Sie online oder laden Sie pdf Handbuch zur Produktsicherheit für Etikettenhersteller Brother TP-M5000N herunter. Brother TP-M5000N 13 Seiten.
Seite drucken
Do not insert foreign objects into the machine
or its connectors and ports. Fire, electric shock
or damage may result if metal objects, such as
paper clips or staples, or liquids come into
contact with internal machine parts. If foreign
objects enter the machine, immediately turn it
off, unplug the power cord from the electrical
socket, and then contact your reseller or
Brother customer service for assistance.
Before cleaning the machine, be sure to turn it
off and unplug the power cord from the
electrical socket, otherwise fire, electric shock
or damage may result.
Power cord
Only use the included power cord and the
specified power supply.
Use under any other conditions may result in a
fire, electric shock or damage.
Do not touch the power cord or the power plug
with wet hands, otherwise it may result in an
electric shock.
Do not spill liquids of any type on the machine,
otherwise fire, electric shock or damage may
result.
Keep out of the reach of children, particularly
infants, otherwise injuries may result.
Do not use the machine near open flames,
otherwise the covering of cables may melt,
resulting in fire, electric shock or damage.
Do not insert objects into the power cord
socket, USB port or Ethernet network port,
otherwise fire, burns, electric shock or damage
may result.
Regularly remove the power plug from the
electrical socket, and clean the base of the
prongs and between the prongs. If the power
plug is left in the electrical socket for an
extended period of time, dust will accumulate
at the base of the power plug prongs. This
could cause a short circuit that may result in
fire.
WARNING
Do not touch any metal parts near the print
head. The print head becomes very hot during
use and remains very hot for some time after
use. Do not touch it directly with your hands.
Do not use damaged power plugs or a bent
electrical socket, otherwise fire, electric shock
or damage may result.
Do not overload electrical sockets or plug
multiple devices into the same electrical
socket, otherwise fire, electric shock or
damage may result.
When unplugging the power cord from the
electrical socket, do not pull on the cord. Hold
the power plug and pull it out of the electrical
socket, otherwise fire, electric shock or
damage may result.
Use the cables correctly and observe the
following precautions, otherwise fire or electric
shock may result.
• Do not damage them.
• Do not modify them.
• Do not twist them.
• Do not severely bend them.
• Do not pull on them.
• Do not place objects on them.
• Do not subject them to heat.
• Do not bind them.
• Do not allow them to be pinched.
Fully insert the power plug into the electrical
socket and power cord connector into the
power cord socket, otherwise fire, electric
shock or damage may result.
Brother strongly recommends that you DO
NOT use any extension cord.
However, if an extension cord is required, use
it correctly and in compliance with the general
guidelines for its use. If an extension cord is
incorrectly used, fire, electric shock or damage
may result.
3