Fujitsu T2020 - LifeBook Tablet PC Bios-Handbuch - Seite 24
Blättern Sie online oder laden Sie pdf Bios-Handbuch für Laptop Fujitsu T2020 - LifeBook Tablet PC herunter. Fujitsu T2020 - LifeBook Tablet PC 26 Seiten. T2020 getting started guide (french)
Auch für Fujitsu T2020 - LifeBook Tablet PC: Handbuch "Erste Schritte (2 seiten), Benutzerhandbuch (16 seiten), (Französisch) Guide D'introduction (2 seiten)
Seite drucken
L i f e B o o k T S e r i e s B I O S
Boot Device Priority Submenu of the Boot Menu
The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.
Be careful of the operating environment when booting from a CD or you may overwrite files by mistake.
■
A bootable CD-ROM has either a floppy disk format or a hard drive format. When the bootable CD-ROM
■
is used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk for-
mat is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if
the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: designation
if a formatted internal hard drive is present since the C: designator is always reserved for the internal hard
drive.The boot sequence ignores the new drive designations, however, your application software will use
the new designations.
F1
ESC
Table 17: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
Boot priority order:
1: Floppy Disk Drive
2: Drive0:
3: CD/DVD Drive
4: NETWORK:
5:
6:
7:
8:
Excluded from boot order:
: USB MEMORY:
: USB HDD:
Exiting from Boot Menu
When you have finished setting the boot parameters with the Boot Menu, you can either exit from the setup utility or
move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit Menu. If you wish
to move to another menu, use the cursor keys.
24
Phoenix SecureCore(tm) Setup Utility
Info
System
Advanced
Boot Device Priority
Boot priority order:
1:
Floppy Disk Drive
2:
Drive0 HDD: FUJITSU MHZ2080BH G2
3:
CD/DVD Drive
4:
NETWORK: Marvell LAN
5:
6:
7:
8:
Excluded from boot order:
:
USB MEMORY: None
:
USB HDD: None
Help
Select Item
Exit
Select Menu
Figure 17. Boot Device Priority Submenu
Description
The boot selections determine the order in which the BIOS searches for the operating system during a
startup sequence. To change the order, highlight one source by using the [up] or [down] cursor keys and
then press the [+] or [-] key to change the order number. Tapping [x] removes from the list a device that is
not installed. Tapping [x] on an item in the Excluded list adds the device to the Boot priority list. Be sure to
save your changed order when you exit the BIOS setup utility.
NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be
overwritten, depending upon your operating environment.
Security
Boot
Keys used to view or
configure devices:
<+>/<Space> or <->
moves the device up or
down.
<x> exclude or include
the device to boot.
-/Space
Change Values
Enter
Select
Sub-Menu
Exit
Item Specific Help
F9
Setup Defaults
F10
Save and Exit