Fujitsu U810 - LifeBook Mini-Notebook - 800 MHz Bios-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Bios-Handbuch für Laptop Fujitsu U810 - LifeBook Mini-Notebook - 800 MHz herunter. Fujitsu U810 - LifeBook Mini-Notebook - 800 MHz 28 Seiten. Première mise en marche de votre ordinateur portable lifebook u810
Auch für Fujitsu U810 - LifeBook Mini-Notebook - 800 MHz: Spezifikationen (2 seiten), Benutzerhandbuch (8 seiten), (Französisch) Manual D'introduction (2 seiten)
Seite drucken
L i f e B o o k U 8 1 0 N o t e b o o k B I O S
LifeBook U Series Notebook BIOS
BIOS SETUP UTILITY
The BIOS Setup Utility is a program that sets up the
operating environment for your notebook. Your BIOS is
set at the factory for normal operating conditions,
therefore there is no need to set or change the BIOS
environment to operate your notebook.
The BIOS Setup Utility configures:
Device control feature parameters, such as changing
■
I/O addresses and boot devices.
System Data Security feature parameters, such as
■
passwords.
Using the TrustedCore Menu
When the Fujitsu logo appears on the screen. press the
[Enter] key or click on the left mouse or touchpad
button; the TrustedCore Menu will appear.
The TrustedCore Menu provides shortcuts to the
following menus and information screens:
BIOS Setup
■
Diagnostic Screen
■
Boot Menu
■
Diagnostic Program
■
Patent Information
■
System Information
■
Continue Booting
■
The menu opens with BIOS Setup highlighted. Click the
[Enter] button to open the BIOS Setup Utility.
The Boot Menu can also be invoked by pressing the
[F12] key when the Fujitsu logo appears on the screen.
You can go directly to the BIOS Setup Utility by pressing
the [F2] key once the Fujitsu logo appears on the screen.
This will open the main menu of the BIOS Setup Utility
with the current settings displayed.
Navigating through the Setup Utility
The BIOS setup utility consists of six menus: Main,
Advanced, Security, Boot, Info, and Exit. This document
explains each menu in turn, including all submenus and
setup items.
The following procedures allow you to navigate the
setup utility menus:
2
1. To select a menu, while holding the
[Fn] button, use the left/right cursor
keys:
2. To select a field within a menu or a
submenu, while holding the [Fn]
button, use the up/down cursor keys:
3. To select the different values for each field, press the
[Spacebar] or [+] to change to the next lower selec-
tion and [F5] or [-] to go to the next higher selec-
tion.
4. To activate a submenu press the [Enter] key.
5. To return to a menu from a submenu, press the [Esc]
key.
6. To go to the Exit menu from any other menu, press
the [Esc] key.
Selecting a field causes a help message
■
about that field to be displayed on the
right-hand side of the screen.
Pressing the Enter key with the highlight
■
on a selection that is not a submenu or
auto selection will cause a list of all
options for that item to be displayed.
Pressing the Enter key again will select
the highlighted choice.
7. Pressing the [Fn]+[F9] key resets all items in the
BIOS to the default values.
8. Pressing the [Fn]+[F10] key saves the current
configuration and exits the BIOS Setup Utility. You
will be asked to verify this selection before it is
executed.
9. Pressing the [Fn]+[F1] key gives you a general help
screen.
Entering the Setup Utility After a Configuration
Change or System Failure
If there has been a change in the system configuration
that does not agree with the parameter settings stored in
your BIOS memory, or there is a failure in the system,
the system beeps and/or displays an error message after
the Power On Self Test (POST). If the failure is not too
severe, it will give you an opportunity to modify the
setup utility settings, as described in the following steps: