Fujitsu PRIMEPOWER 2500 Hardware-Plattform-Handbuch - Seite 9
Blättern Sie online oder laden Sie pdf Hardware-Plattform-Handbuch für Server Fujitsu PRIMEPOWER 2500 herunter. Fujitsu PRIMEPOWER 2500 50 Seiten. Enterprise servers
Auch für Fujitsu PRIMEPOWER 2500: Handbuch (21 seiten)
Seite drucken
Also, the following messages are stored many times in XSCF log, too. The error messages can be ignored
safely.
SCF> show-error-logs <Return>
***** No.01/32
Date
SysDamage
FaultDetect = OBP
FaultCode
DetailInfo = [BOOTB]Boot Block error
ReplaceParts= ---
Syslog msg = Detected hardware error
1.2
Solaris OS - Notes and Bug Information
1.2.1 The order of instance numbers of optional cards
If an additional option card is installed, the instance number on the card might be assigned out of order.
Additional installation by Dynamic Reconfiguration or PCI Hot-plug is also applicable but replacement by
Dynamic Reconfiguration or PCI Hot plug is not applicable.
If you need to assign the instance numbers orderly, follow these steps below.
1.
Set the following in /etc/system.
set mtc_off=1
2.
Reboot the system.
3.
Install the optional card.
After the above setting, it may take longer time to reboot the system. If that affects the system, delete the
line and reboot the system.
1.2.2 Notes on Solaris OS operation
CD-ROM/DVD-ROM in UNIX file system (UFS) format
Do not use any CD-ROM/DVD-ROM in UNIX file system (UFS) format that is not produced for the Solaris
OS.
Even if the file system in such a CD-ROM / DVD-ROM is in UFS format, it's file construction may differ
from that of a Solaris system. If such a CD-ROM / DVD-ROM is used, serious problems, including a
system crash may occur.
Enter the OpenBoot environment
The following operations on a running system will enforce the system to move to Open Boot mode, which
might damage data.
Connecting / Disconnecting the keyboard cable to / from the system.
Sending a Break signal from the console terminal connected to the serial port.
Turning on/off the power to the unit connected to the serial port of the system.
(This power on/off is treated as a Break signal.)
To prevent a system from entering the Open Boot mode, do the following:
= 2008/09/16 09:47:00
= ALARM(STOP)
= 260000FF
30C97830 260000FF 08071523 3615FFFF
5B424F4F 54425D42 6F6F7420 426C6F63
6B206572 726F7200 00000000 00000000
00000000 00000000 00000000 00000000
3