Fujitsu PRIMERGY CX122 S1 Betriebshandbuch - Seite 47

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Server Fujitsu PRIMERGY CX122 S1 herunter. Fujitsu PRIMERGY CX122 S1 50 Seiten.

– Hard disk drives installed - Local USB installation

Instead of network booting, you can also boot and install your PRIMERGY

CX122 S1 server node from local USB media.

Ê Connect a USB storage medium (hard disk drive, optical drive or flash

media) containing a bootable image to your server.

Ê Connect a USB mouse / keyboard and VGA display to your server.

Ê Switch on the display.

Ê Make sure that none of the servers from your network has been

dedicated to be a PXE server.

Ê Press the On/Off button (item 5 in figure

Your PRIMERGY CX122 S1 server node will boot from the local disk

image.

Ê Follow the on-screen instructions.

– No hard disk drives installed - iSCSI boot

iSCSI (Internet SCSI) is a protocol for linking servers and data storage

facilities, similar to the Fibre Channel Protocol (FCP). iSCSI means "SCSI

over Internet Protocol". iSCSI boot allows a server to be booted remotely

from a drive in an iSCSI-based Storage Area Network (SAN).

For further instructions, please refer to the "iSCSI Boot for PRIMERGY

Servers with Intel Network Controllers" installation and configuration guide,

available from the ServerView Suite DVD 2 or at http://manuals.ts.fujitsu.com.

CX122 S1

10 on page

Operating Manual

Configuring the server

41).