Fujitsu PRIMERGY CX400 M1 Systemkonfigurator und Bestellinformationshandbuch - Seite 26
Blättern Sie online oder laden Sie pdf Systemkonfigurator und Bestellinformationshandbuch für Server Fujitsu PRIMERGY CX400 M1 herunter. Fujitsu PRIMERGY CX400 M1 33 Seiten.
Seite drucken
J
VI
Section
Drive Bay for 2x HDD/SSDs
CX400 M1 - S26361-K1530-V300 only
as soon as available
S26361-F5519-E300
Dummy HDD kit
max. 1x per CX25y0
VII
Section
On-board Controller and SATA DOM
On board SATA Controller with 6 Gb/s and up to 6x 2.5" SATA HDDs (no additional controller required)
Onb. SATA Controller
Selectable on BIOS setting
AHCI mode (default) or RAID
(0 / 1)
Solid State Disk, Boot Drive, SATA DOM (SATADOM Port, AHCI)
SSD SATA 6Gb/s DOM, Boot Device, non "hot plug/hot replace"
64GB, MTBF=3Mhrs, Endurance=172 TBW (Seq. write)
128GB, MTBF=3Mhrs, Endurance=345 TBW (Seq. write)
SATADOM is designed for use as a boot drive with the Endurance Spec. above.
Vmware not supported.
max. 1x per system
1x
Solid State Disk, Boot Drive, SATA DOM SLC (SATADOM Port, AHCI)
SSD SATA 6Gb/s DOM SLC, Boot Device, non "hot plug/hot replace"
64GB, SATA DOM SLC
SATADOM SLC is designed for use as a Virtual SAN boot drive.
VMware ESXi 6.0 U2 is only supported.
max. 1x per system
VIII
Section
2.5" SATA HDD / SSD
SATA Disk Drive 2.5"
HDD SATA 6Gb/s 2.5" with hot plug/hot replace tray
500GB 7.2krpm,<9,5ms, 64MB Cache, 512n
1TB 7.2krpm,<9,5ms, 64MB Cache, 512n
1TB 7.2krpm,<9,5ms, 128MB Cache, 512e
2TB 7.2krpm,<9,5ms, 128MB Cache, 512e
max. 2 per server node
only for CX25y0 M2
Enterprise Solid State Disk, 10DWPD class
SSD SATA 6Gb/s 2.5" with hot plug/hot replace tray
200GB, write-intensive
400GB, write-intensive
800GB, write-intensive
1.2TB, write-intensive
max. 2 per server node
only for CX25y0 M2
Enterprise Solid State Disk, 3DWPD over 5 years
SSD SATA 6Gb/s 2.5" with hot plug/hot replace tray
120GB, for read/write workload (mixed-use)
240GB, for read/write workload (mixed-use)
480GB for read/write workload (mixed-use)
960GB, for read/write workload (mixed-use)
1.92TB, for read/write workload (mixed-use)
max. 2 per server node
K
S26361-F5552-E330
SATA Cable
needed to be ordered 1x
SATA drives <= 2pcs
max. 1x per system
S26361-F3895-E500
S26361-F3895-E100
S26361-F3936-E100
S26361-F3936-E200
S26361-F5592-E200
S26361-F5592-E400
S26361-F5592-E800
S26361-F5592-E120
S26361-F5588-E120
S26361-F5588-E240
S26361-F5588-E480
S26361-F5588-E960
S26361-F5588-E192
Fujitsu Technology Solutions x86 PRIMERGY Server
System configurator and order-information guide
PRIMERGY CX400 M1
S26361-F5523-E64
S26361-F5523-E128
S26361-F5621-E64
Mixed configuration with SAS HDD
not supported
CX25y0 M2
Endurance
10DWPD over 5y
CX25y0 M2
Endurance
3DWPD over 5y
Status 2016-10-31
SATA
SATA
SATA
26 of 33