Fujitsu PRIMERGY RX1330 M4 Kundendienst-Informationsbulletin
Blättern Sie online oder laden Sie pdf Kundendienst-Informationsbulletin für Server Fujitsu PRIMERGY RX1330 M4 herunter. Fujitsu PRIMERGY RX1330 M4 3 Seiten. Customer information bulletin
PRIMERGY
CUSTOMER INFORMATION BULLETIN
Number/Revision:
PY-CIB049-00
Issue Date:
14 April 2020
Title:
The System Tries to Power on Before iRMC is Ready
Applies to:
PRIMERGY RX1330 M4/TX1330 M4/TX1320 M4
Effective Duration:
Permanent
Problem:
When the power is connected to the PRIMERGY server, the system tries to start before
the Fujitsu Integrated Remote Management Controller (iRMC) is ready. This is indicated
by the fans speeding up to the maximum as soon as the power is connected. The iRMC
takes about two minutes to boot up, then you see the display on the screen indicating
POST and the fans slow down to normal speed.
This is not expected behavior. The iRMC should boot up first indicated by a stable
power LED. The system can then be started using the power switch (or remotely using
the iRMC interface).
Solution / Workaround:
This issue is resolved by the following procedure: