Fujitsu PRIMERGY TX100 S1 Optionen Handbuch - Seite 12
Blättern Sie online oder laden Sie pdf Optionen Handbuch für Server Fujitsu PRIMERGY TX100 S1 herunter. Fujitsu PRIMERGY TX100 S1 46 Seiten. For tx100 s1
Auch für Fujitsu PRIMERGY TX100 S1: Spezifikationen (13 seiten), Handbuch für Service-Ergänzungen (46 seiten), Technisches Handbuch (32 seiten)
Seite drucken
Before starting up
V
CAUTION!
During installation and before operating the device, observe the
instructions on environmental conditions for your device.
If the device is brought in from a cold environment, condensation may
form both inside and on the outside of the device.
Wait until the device has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused
to the device if this requirement is not observed.
Transport the device only in the original packaging or in packaging
that protects it from knocks and jolts.
Installation and operation
V
CAUTION!
The device may only be operated in a maximum ambient temperature
of 35°C.
If the device is integrated in an installation that receives power from
an industrial (public) power supply network with the IEC309
connector, the (public) power supply protection must comply with the
requirements for non-industrial (public) power supply networks for the
type A connector.
The unit automatically adjusts itself to a mains voltage in a range of
100 V - 240 V. Ensure that the local mains voltage lies within these
limits.
This device must only be connected to properly grounded shock-
proof sockets or insulated sockets of the rack's internal power supply
with tested and approved power cables.
Ensure that the device is connected to a grounded shockproof socket
close to the device.
12
Options Guide
Safety instructions
TX100 S1