Fujitsu Primergy TX120 Start Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Start Handbuch für Server Fujitsu Primergy TX120 herunter. Fujitsu Primergy TX120 8 Seiten.
Auch für Fujitsu Primergy TX120: Handbuch für Service-Ergänzungen (38 seiten)

Seite drucken

Conditions

n Restriction of installation features

■ ��

��

- In dusty areas, dust will stick to the front and backside of the server for a short period of time. Since it causes

failure, changing the installation place is recommended.

- When performing maintenance, the server is laid down and operated from above the side. Keep the spaces

(approx. 70cm x 90cm) to be able to operate it from above when deciding the installation place.

n How to set the foot stands

Follow the procedure below to fix the provided foot stands on the server.

Assemble the parts of the foot stands and

adjust the width to the server.

Assemble the parts not to be narrower than line positions

��

When the width of the foot stand is too narrow, insert

the foot opener supplied with the server into the latches

on the reverse side of the foot stand, and expand it while

holding down the opener as the figure below indicates.

��

■ ��

��

��℃��℃

��

Put the foot stands on the place where the serv-

er is installed, and install it onto the foot stands.

Place the foot stands inside the rubber feet on the side of the

server.

��

Push the foot stands from both sides to adjust

the width to the server.

Confirm that the server is fixed tenaciously.