Fujitsu PRIMERGY TX150 S8 Systemkonfigurator und Bestellinformationshandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Systemkonfigurator und Bestellinformationshandbuch für Server Fujitsu PRIMERGY TX150 S8 herunter. Fujitsu PRIMERGY TX150 S8 24 Seiten. Mono-socket intel xeon processor server
Auch für Fujitsu PRIMERGY TX150 S8: Datenblatt (10 seiten)
Seite drucken
D1
S26361-F3694-E10
Independent Mode
Independent Channel Mode allows all channels to be populated in any order. No specific Memory RAS features are defined
Requires min 1 memory Module per CPU
S26361-F3695-E1
Rank Sparing Mode Installation
BIOS Setup factory preinstalled to this mode. One Rank is spare of other ranks on the same channel. Spare Rank is not shown in System Memory.
For effective capacity within a channel, please have a look below.
Supported for RDIMM only.
1x
Requires min 2x 1R/2R or 1x 4R modules per CPU
S26361-F3695-E2
Performance Mode Installation
BIOS Setup factory preinstalled for max. Performance, LV memory might be set to 1.5V operation. Four identical memory modules
will be equipped in one memory bank to achieve highest memory performance. All four modules are active and full capacity can be used.
Multiple of 3 identical modules to be configured
S26361-F3695-E3
Mirrored Channel Mode Installation
BIOS Setup factory preinstalled to this mode. 2 identical memory modules are always equipped in one memory bank to use the
Mirrored channel Mode. Only one module contains active data, the 2nd module contains mirrored data
Supported for RDIMM only.
2 identical modules to be configured
Unbuffered Memory (UDIMM) no SDDC (chipkill) support
- one DDR3 unbuffered ECC mem. Module, 1.35V
Choose up to 6 order codes per CPU
6x per
CPU, max.
2GB (1x2GB) 1Rx8 L DDR3-1600 U ECC
2 modules
4GB (1x4GB) 2Rx8 L DDR3-1600 U ECC
per channel
Registered Memory (RDIMM) with SDDC (chipkill) support
- one DDR3 registered ECC mem. Module, 1.35V
1600MHz supported with up to 2DPC (8 modules/CPU)
at 1.5V
Choose up to 6 order codes per CPU
4GB (1x4GB) 1Rx4 L DDR3-1600 R ECC
8GB (1x8GB) 2Rx4 L DDR3-1600 R ECC
16GB (1x16GB) 2Rx4 L DDR3-1600 R ECC
H
Effective Memory capacity / Rank Sparing Mode, 1 Channel populated
UDIMM
2GB
1R
2GB
2R
4GB
1DPC
na
na
2DPC
na
na
Minimum one memory module or order code = first memory
S26361-F3694-E513
S26361-F3694-E514
S26361-F3697-E514
S26361-F3697-E515
S26361-F3697-E516
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY TX150 S8
RDIMM
1R
8GB 2R 16GB
2R
na
na
na
4GB
12GB
24GB
Note 1.)
Max. DDR3 memory speed depends on the memory configuration
(No of mem modules per channe) as well as on the CPU type.
The memory channel with the lowest speed defines the speed
of all CPU channels in the system.
For real memory speed (depending on memory type / population),
please check the spreadsheet "Memory speed" below
Mix of memory modules is only possible within the same group
Status 2016-02-29
10 of 24