Fujitsu fi 5750C - Document Scanner Handbuch für Installationsverfahren - Seite 5

Blättern Sie online oder laden Sie pdf Handbuch für Installationsverfahren für Scanner Fujitsu fi 5750C - Document Scanner herunter. Fujitsu fi 5750C - Document Scanner 9 Seiten. Image scanner
Auch für Fujitsu fi 5750C - Document Scanner: Erste Schritte (40 seiten), Handbuch für Installationsverfahren (7 seiten), Installationsverfahren (3 seiten), Spezifikationen (2 seiten), Handbuch "Erste Schritte (42 seiten), Broschüre & Specs (2 seiten), Gebrauchsanweisung (11 seiten), Anweisungen zum Austausch von Verbrauchsmaterialien und zur Reinigung (19 seiten), Anweisungen zur Reinigung (2 seiten), Reinigung und Wartung (39 seiten), Anweisungen zur Reinigung (2 seiten)

Fujitsu SCSI Scanner Installation Procedures

Installing the ISIS driver.

7. Next go back to the Scanner Setup Menu and click on ISIS Driver.

8. If you didn't install the Error Recovery Guide during the Twain driver installation you

will be asked again. Proceed and follow the prompts to complete the ISIS driver

installation.

9. Do not reboot at this time!

Installing ScandAll 21.

10. Back to the Scanner Setup Menu and click on Software Utility - ScandAll 21.

11. The ScandAll 21 installation wizard will appear. Click next and follow the prompts to

complete the installation.

12. Once all of the above is completed then remove the Scanner Setup CD, Reboot

your system, and go to Step E.

Step D: Installing the drivers from our Web Page.

Installing the ASPI-Twain driver.

The STI-Twain drivers are not supported by Windows NT, consequently, you must install

the ASPI-Twain driver.

1. Create a new folder and name it Fujitsu Downloads.

2. Next go to the following link and click on

3. Fill in the pre-registration box when it pops up and continue to the drivers download

page.

4. Afterwards click on ASPI Twain Software Drivers.

5. Scroll down the list of scanner models in the left column and select the appropriate

ASPI Twain driver to the right of your scanner model.

6. Double click on the driver file name and the File Download box will popup.

7. Click on Save and then use the browse (or other folder navigation) button until you

have the Twain Download folder you created in the Save As box.

8. Click Save.

9. When completed close the Download Complete window and go to the Twain

Download folder.

10. Open the folder and you will see the saved driver file. Double click on the file to

unzip it and the WinZip* self-extractor box will popup. Click on browse and select the

Fujitsu Downloads folder, then click on Extract. The file will begin to unzip and

when finished a message box will report the number of files unzipped. Click on OK

and close WinZip.

11. In the ASPI Twain Download folder locate the setup.exe file and double click.

Afterwards follow the prompts and reboot when finished

Rev051906A

Windows NT 4.0

Drivers and

Downloads.

Page 5 of 9