Fujitsu fi 5750C - Document Scanner Reinigung und Wartung - Seite 21

Blättern Sie online oder laden Sie pdf Reinigung und Wartung für Scanner Fujitsu fi 5750C - Document Scanner herunter. Fujitsu fi 5750C - Document Scanner 39 Seiten. Image scanner
Auch für Fujitsu fi 5750C - Document Scanner: Erste Schritte (40 seiten), Handbuch für Installationsverfahren (7 seiten), Handbuch für Installationsverfahren (9 seiten), Installationsverfahren (3 seiten), Spezifikationen (2 seiten), Handbuch "Erste Schritte (42 seiten), Broschüre & Specs (2 seiten), Gebrauchsanweisung (11 seiten), Anweisungen zum Austausch von Verbrauchsmaterialien und zur Reinigung (19 seiten), Anweisungen zur Reinigung (2 seiten), Anweisungen zur Reinigung (2 seiten)

Seite drucken

Fujitsu fi 5750C - Document Scanner Reinigung und Wartung

CONTENTS

Introduction

1 NAMES AND FUNCTIONS OF PARTS

2 BASIC SCANNER OPERATION

3 SCANNING VARIOUS TYPES OF DOCUMENTS

4 DAILY CARE

5 REPLACING CONSUMABLES

6 TROUBLESHOOTING

6.1 Removing jammed documents

6.2 Indications of operator panel for errors

6.3 Items to check before contacting the dealer where you

bought the scanner

6.4 Checking labels on the scanner

7 ONLINE SETUP

8 DOCUMENT SPECIFICATION OF ADF

9 OPTIONS

10 SCANNER SPECIFICATIONS

Appendix

6.2 Indications operator panel for errors (Continued from the previous page)

Indication

Meaning

Imprinter malfunction (*)

Memory malfunction

Malfunction at SCSI interface controller

Background switching mechanism malfunction

E10

ROM malfunction

E11

Fan malfunction

E12

Heater malfunction

E15

Extended memory board malfunction * See the ATTENTION below.

E16

Option board malfunction

E17

Imprinter fuse malfunction (*)

E18

Sensor malfunction

E19

LSI malfunction

E1A

Scanner inside communication malfunction

* "EA" and "A17" are alarms related with the Imprinter option (sold separately).

ATTENTION

An error has occurred to any of the additional memory boards installed by the user. Please check the following conditions given below, and

refer to

"9.1 Extended memory

board". This error indication will be displayed 3 times after turning on the scanner to indicate that the scanner

will perform scanning operations with the extended memory boards deactivated.

1. Check for correct additional memory module number.

2. Is the additional memory board installed correctly?

3. Isn't the additional memory board broken?

4. Two memory boards are required, are there two installed?

When you encounter any alarm, turn off and on the scanner. If the alarm is still displayed on the Function No. display, turn off the scanner,

remove the additional memory board and check that the scanner functions correctly. Return the memory board where the memory was

purchased or contact an authorized FUJITSU scanner service provider.

| 3