Fujitsu fi-5000N Erste Schritte - Seite 21

Blättern Sie online oder laden Sie pdf Erste Schritte für Scanner Fujitsu fi-5000N herunter. Fujitsu fi-5000N 29 Seiten. Fujitsu fi-5000n: user guide
Auch für Fujitsu fi-5000N: Technische Daten (2 seiten)

Seite drucken

2.6 Registering Fingerprints

For user authentication, register each user's fingerprint

information on this product. However, injured users and

users with difficulties in registering fingerprints can be

authenticated by using a PIN (personal identification

number).

below.

1. Open the Cover.

2. Confirm that the "Place your finger on the sen-

sor" (this indicates the "Logout" status) is dis-

played on the fi-5000N Message Display. Then,

press the [SET] key.

The following screen appears.

Setup

Change PIN Code

Show Network Config

3. Select "Register Finger", and press the [ENT]

key.

The list of registered users on fi-5000N appears.

Select User

1(user's name)

2(user's name)

3(user's name)

4. Press the [ ] or [ ] key to select a user from the

list of registered users, and press the [ENT] key.

You can also select the registered

user by entering user ID number:

HINT

1. With the keyboard, enter the user

ID number.

2. Press the [ENT] key.

⇒

The name of the user to log in will

appear selected.

3. Press the [ENT] key again.

The following screen prompts you to enter the PIN of

the selected user.

PIN:_

Cancel:[ESC]

5. Enter the PIN set in "Registering Users" (on

page 11), and press the [ENT] key.

If the PIN does not match, the message "The PIN is

incorrect" is displayed, and you are prompted to enter

again.

If the PIN matches, the following screen appears.

Look at the sticker

inside of cover for

finger placement

OK:[ENT]

Confirm the correct finger placement by referring to

the sticker inside of the cover. For the details, please

refer to "Appendix 3 Using User Authentication By

Fingerprint.".

Press [ENT] key, then the following screen appears.

Registration:

Place your finger

on the sensor

6. Place the finger to register on the fingerprint

sensor.

If your fingerprint is correctly captured, a buzzer

sounds and at the same time the following screen

appears.

Processing...

Remove your finger

from the sensor

fi-5000N Getting Started