Fujitsu fi-60F Erste Schritte - Seite 19
Blättern Sie online oder laden Sie pdf Erste Schritte für Scanner Fujitsu fi-60F herunter. Fujitsu fi-60F 20 Seiten. Image scanner
Auch für Fujitsu fi-60F: Broschüre & Specs (2 seiten), Erste Schritte (20 seiten)
Seite drucken
Appendix 2
Do not use any aerosol sprays or alcohol based sprays to clean the scanner.
Dust blown up by strong air from the spray may enter the inside of the scanner. This may cause the scanner
to fail or malfunction.
Sparks, caused by static electricity, generated when blowing off dust and dirt from the outside of the scanner
may cause a fire.
■ Cleaning Materials
Cleaning Materials
Cleaner F1
Cleaning Wipe
Lint-free dry cloth
*1) It may take long before the cleaner vaporizes if a large quantity is used. When cleaning the scanner parts, dampen a
cloth with modest quantities of the cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to
leave no residue on the surface of the cleaned parts.
*2) For details about cleaning materials, contact the FUJITSU scanner dealer where you purchased the scanner.
■ Parts to Clean
Part to clean
Document holding pad
Document bed
DAILY CARE
Parts Number
PA03950-0352 (*1)
PA03950-0419
Any commercially available cloth
Remarks
Clean the locations using a soft
cloth moistened with cleaner F1.
Remarks
1 bottle
Moisten the cloth with this fluid and wipe
the scanner clean. (*2)
1 pack (24 sheets)
Pre-moistened with Cleaner F1, Clean-
ing Wipes are used instead of moistened
cloths.(*2)
AP-3