Fujitsu M3096GX Anweisungen zum Austausch von Verbrauchsmaterialien und zur Reinigung - Seite 10
Blättern Sie online oder laden Sie pdf Anweisungen zum Austausch von Verbrauchsmaterialien und zur Reinigung für Scanner Fujitsu M3096GX herunter. Fujitsu M3096GX 12 Seiten. Departmental document scanners
Auch für Fujitsu M3096GX: Handbuch für Installationsverfahren (7 seiten), Handbuch für Installationsverfahren (9 seiten), Broschüre & Specs (2 seiten)
Seite drucken
M3096EX/GX C
onsuMablE
R
C
EplaCEMEnt and
lEaninG
C
adF
leaninG the
The cleaning paper is designed to remove only loose paper dust and ink
from the rollers. Use them approximately every 5,000 pages scanned.
They are to be used in between the thorough cleanings of the scanner.
Using the cleaning paper does not take the place of the more
complete cleanings described later in this section
•
Pull the ADF Lever to open
the ADF.
•
Apply F1 Cleaner or
isopropyl alcohol. to both
sides of a new sheet of
Cleaning Paper.
•
Place the Cleaning Paper
on the ADF so that the
edge of the sheet touches
the Plastic Rollers.
•
Close the ADF and turn
the scanner ON. The
Cleaning Paper will be fed
through the scanner.
•
Turn the scanner OFF.
•
Flip the Cleaning Paper over and repeat the steps above.
Note:
The cleaning paper only remove loose paper particles and toner.
They are not a substitute for doing a thorough cleaning to the ADF.
i
nstRuCtions
C
p
with the
leaninG
ADF Lever
ADF
Paper Guide
apeR
Paper Guide
Cleaning
Sheet