Fujitsu ScanSnap iX1600 Anweisungen zum Austausch von Verbrauchsmaterialien und zur Reinigung - Seite 8
Blättern Sie online oder laden Sie pdf Anweisungen zum Austausch von Verbrauchsmaterialien und zur Reinigung für Scanner Fujitsu ScanSnap iX1600 herunter. Fujitsu ScanSnap iX1600 22 Seiten.
Seite drucken
9.
Brake roller (x2)
Remove the brake rollers from the scanner to clean.
Gently wipe the dirt and dust off from along the slots on the surface of the brake rollers. Be careful not to
damage the surface of the rollers.
10. Glass (x2)
Gently wipe the dirt and dust off the surface of the glass sections. Make sure that it is cleaned properly
because dirty glass can cause vertical lines to appear in the scanned image.
11. Ultrasonic sensor (x2)
Gently wipe the dirt and dust off the surface of the ultrasonic sensors.
If you have trouble wiping the ultrasonic sensors with the cloth, use a cotton swab.
12. Pick roller (x1)
Remove the pick roller from the scanner to clean.
Gently wipe off the dirt and dust along the grooves on the roller surface. Residue on the roller
may affect the feeding performance. Be careful not to damage the surface of the roller.
13. Plastic idler roller (x2)
Gently wipe the dirt and dust off the rollers as you rotate them manually. Be careful not to damage the
surface of the rollers. Make sure that they are cleaned properly because residue on the rollers will affect the
feeding performance.
14. Rubber idler roller (x2)
Gently wipe the dirt and dust off the rollers as you rotate them manually. Be careful not to damage the
surface of the rollers. Make sure that they are cleaned properly because residue on the rollers will affect the
feeding performance.
(9) Plug in the power cable, and then press the [Scan] button for 3 seconds with the ADF top section open.
Reference: Plug in the power cable only when cleaning the Feed-Roller and the Exit-Roller.