Brother HL-2270DW Handbuch zur Schnelleinrichtung - Seite 20

Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Druck-Server Brother HL-2270DW herunter. Brother HL-2270DW 36 Seiten. How do i configure the wireless printer using wi-fi protected setup or aoss and install the printer driver in windows?
Auch für Brother HL-2270DW: Benutzerhandbuch für das Netzwerk (47 seiten), Handbuch zur Schnelleinrichtung (36 seiten), Installationshandbuch (5 seiten), Handbuch zur Schnelleinrichtung (35 seiten), Fragen und Fehlerbehebung (6 seiten)

Brother HL-2270DW Handbuch zur Schnelleinrichtung
Wireless Network
n
If the confirmation screen appears, check the
box and click Next. When the following screen
appears, check Yes if you want to connect with
the listed SSID. Click Next and go to r.
o
The wizard will search for wireless networks
available from your machine. Choose the SSID
that your checked in advance on page 15), and
then click Next.
Note
• If the list is blank, check that the access point
has power and is broadcasting the SSID, and
then see if the machine and the access point
are within range for wireless communication.
Then, click Refresh.
• If your access point is set to not broadcast the
SSID you can manually add it by clicking the
Advanced button. Follow the on-screen
instructions for entering the Name (SSID), and
then click Next.
20
p
If your network is not configured for
Authentication and Encryption, the following
screen will appear. To continue configuration,
click OK and go to r.
q
Enter the Network Key and then enter the key
again in Confirm Network Key, then click
Next.
r
Click Next. The settings will be sent to your
machine.
Note
• The settings will remain unchanged if you click
Cancel.
• If you want to manually enter the IP address
settings of your machine, click Change IP
Address and enter the necessary IP address
settings for your network.
• (For USB cable users) If the wireless setup
failure screen appears, click Retry and try
starting from step o again.
s
For USB cable users, go to w.
For Ethernet cable users, go to t.
®
Windows