Brother HL-2270DW Benutzerhandbuch für das Netzwerk - Seite 32

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für das Netzwerk für Druck-Server Brother HL-2270DW herunter. Brother HL-2270DW 47 Seiten. How do i configure the wireless printer using wi-fi protected setup or aoss and install the printer driver in windows?
Auch für Brother HL-2270DW: Handbuch zur Schnelleinrichtung (36 seiten), Handbuch zur Schnelleinrichtung (36 seiten), Installationshandbuch (5 seiten), Handbuch zur Schnelleinrichtung (35 seiten), Fragen und Fehlerbehebung (6 seiten)

Control panel setup

Enabling or disabling the wireless network (For HL-2270DW)

If you want to switch the wireless network to enabled/disabled (disabled is the default), please follow these

steps:

Make sure that the power cord is plugged in.

Turn on the machine and wait until the machine is in the Ready state.

Hold down Go for 10 seconds. Release Go when the machine prints a Network Configuration page that

indicates the current network settings.

Note

If you release Go in less than 10 seconds, the machine will print if you have any reprint data.

Check the text to the right of IEEE 802.11b/g in the Node Type section. Active means that the wireless

setting is enabled and Inactive means that the wireless setting is disabled.

Note

You can switch the wireless network to enabled/disabled, using the BRAdmin applications or Web Based

Management (web browser). (For more information, see Other Management Utilities on page 6.)

Brother NC-XXXXw, IEEE 802.11b/g (Active)

Firmware Ver.0.20 (07.11.22)

XX-XX-XX-XX-XX-XX

BRWXXXXXXXXXXXX

BRNXXXXXXXXXXXX

BINARY_P1

TEXT_P1

POSTSCRIPT_P1

PCL_P1

BRNXXXXXXXXXXXX_AT