Brother HL-3070CW Anleitung zur Reparatur

Blättern Sie online oder laden Sie pdf Anleitung zur Reparatur für Druck-Server Brother HL-3070CW herunter. Brother HL-3070CW 3 Seiten. Windows network connection
Auch für Brother HL-3070CW: Software-Handbuch (1 seiten), Technische Daten (4 seiten), Broschüre & Specs (4 seiten), Broschüre & Specs (8 seiten)

Seite drucken

Brother HL-3070CW Anleitung zur Reparatur

HL3070CW Windows Network Connection Repair Instructions

Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother

machine may stop printing, is because the connection between the computer and the Brother machine is lost.

This can occur as a result of wrong settings or configuration of the printer driver. There are several basic

For troubleshooting purposes, disable any firewall programs that are running. Once you are able to print,

PART 1: VERIFY THE BROTHER MACHINE IS POWERED ON AND THERE ARE NO ERRORS

1. If the LCD screen is blank, then the Brother machine is not powered on. Verify that it is plugged into

a working outlet and any power switches are turned to the ON position.

2. Check the LCD screen for any error messages. An example would be Paper Jam or Toner Empty. If

the LCD screen shows an error, troubleshoot to clear issue indicated.

PART 2: VERIFY THE CONNECTION TO THE WIRELESS ROUTER OR ACCESS POINT

1. Verify that there is no Ethernet cable connected between the Brother machine and the router or

access point.

2. Print the Printer Settings by pressing the OK button 3 times.

3. Look at the last page. Verify the Node Type is Brother NC-7500W, IEEE 802.11b/g (Active). If it is

listed as Inactive, you will need to activate the wireless network card.

a. With the printer power turned on and the printer Ready, Press + (plus) or - (minus) to choose

Network. Press OK.

b. Press + (plus) or - (minus) to choose WLAN. Press OK.

Press + (plus) or - (minus) to choose WLAN ENABLE. Press OK again.

d. Press + (plus) or - (minus) to choose ON. Press OK again.

e. Wait 1 minute. Press the OK button 3 times to print the settings pages.

4. On the last page, ensure that the Wireless Link Status states: LINK OK, then continue to PART 3.

NOTE: If the status states LINK DOWN, FAILED TO ASSOCIATE, this indicates a connection

error, or you cannot find the Wireless Link Status section, this indicates that the unit is not

connected to the wireless network. You will need to reset and configure the wireless

network card.

PART 3: VERIFY COMMUNICATION BETWEEN THE BROTHER MACHINE AND COMPUTER

1. Obtain the computer's IP Address:

a. On the computer, click START

b. In the START SEARCH box type: COMMAND

Press ENTER. A command prompt window will open.

d. Type: IPCONFIG

e. Press ENTER on your keyboard. You should receive information about your computer's

network connection. Locate the line labeled IP ADDRESS. Make a note of the IP Address. If

you do not receive an IP address, this indicates that there is a problem with your computer's

network connection. Try restarting the computer, and completing PART 3 again. If you still

do not receive an IP address contact your router manufacturer or network administrator for

support.

troubleshooting steps you can take to resolve this issue.

enable your firewall again.