Fujitsu ETERNUS DX S3 Series Konfigurationshandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Lagerung Fujitsu ETERNUS DX S3 Series herunter. Fujitsu ETERNUS DX S3 Series 38 Seiten. Hybrid storage systems, all-flash arrays, power synchronized unit
Auch für Fujitsu ETERNUS DX S3 Series: Konfigurationshandbuch (16 seiten), Sicherheitsvorkehrungen (12 seiten)

Fujitsu ETERNUS DX S3 Series Konfigurationshandbuch
Chapter 1
Workflow
This chapter describes how to connect the ETERNUS DX/AF to a server running AIX. The workflow is shown
below.
Required Documents
"Server Support Matrix"
"Server Support Matrix for FC-SWITCH"
"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETERNUS DX/AF
to be connected
"Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Settings"
"ETERNUS Web GUI User's Guide"
"ETERNUSmgr Install Guide"
"ETERNUSmgr User Guide"
Manuals supplied with the server, Fibre Channel card, Fibre Channel card driver, and multipath driver
Workflow
Installing ETERNUSmgr and Setting Up the ETERNUS DX/AF
If ETERNUSmgr is to be used, install it and set up the ETERNUS DX/AF. Also, check the WWN of the
Fibre Channel card for the server that is required to set the ETERNUS DX/AF.
"Chapter 4 Checking the Server Information" (page 16)
"Chapter 5 Installing and Setting Up ETERNUSmgr" (page 17)
"Chapter 6 Setting Up the ETERNUS DX/AF" (page 18)
Checking the setup and maintenance operations
-
"ETERNUS Web GUI User's Guide"
Installing ETERNUSmgr
"ETERNUSmgr Install Guide"
-
Checking the ETERNUSmgr operational procedures
"ETERNUSmgr User Guide"
-
Setting up the ETERNUS DX/AF
"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETER-
-
NUS DX/AF to be connected
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX
7
Copyright 2018 FUJITSU LIMITED
P3AM-3782-23ENZ0