Fujitsu ETERNUS DX100 S3 Konfigurationshandbuch Serververbindung - Seite 8

Blättern Sie online oder laden Sie pdf Konfigurationshandbuch Serververbindung für Lagerung Fujitsu ETERNUS DX100 S3 herunter. Fujitsu ETERNUS DX100 S3 12 Seiten. Hybrid storage systems, all-flash arrays, power synchronized unit
Auch für Fujitsu ETERNUS DX100 S3: Konfigurationshandbuch Serververbindung (12 seiten), Konfigurationshandbuch (28 seiten), Konfigurationshandbuch (13 seiten), Setup-Handbuch (15 seiten), Sicherheitsvorkehrungen (12 seiten)

Seite drucken
Fujitsu ETERNUS DX100 S3 Konfigurationshandbuch Serververbindung
Chapter 2
Setting Up the ETERNUS DX
2.1

Common Settings

This section explains the settings required for all server OSes, regardless of the connection configuration.
See the "ETERNUS Web GUI User's Guide" for details of how to set up and operate ETERNUS Web GUI.
2.1.1

Setting the To-server Connection Type (Setting the SAS Port Parameters)

For each connection configuration, set the indicated items only. All other parameters should be left on their
default values.
Table 2.1 SAS port parameter settings
Parameter
Reset Scope
Release Reservation if Chip is Reset
2.1.2

Creating the Server Accessible LUN Groups (Setting the LUN Groups)

Create LUN groups (Affinity Group) for the server to access. Refer to "Connectivity (Basic Information)" in
"ETERNUS Web GUI User's Guide" for details, and set the LUN groups.
When the server OS is Windows
ascending order.
The server cannot recognize the ETERNUS DX LUNs unless they are assigned in this order.
This restriction does not apply when the server is running a Solaris OS.
®
, Linux, or VMware ESX, assign SCSI LUN numbers starting from LUN0 in
8
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2014 FUJITSU LIMITED
®
Solaris OS, Windows
, Linux, VMware ESX
I_T_L (Default value)
Disable (Default value)
P3AM-8542-04ENZ0